Skip to main content
Version: Testnet (v5.0.0-rc.1)

Aztec CLI Reference

This documentation is auto-generated from the aztec CLI help output.

Generated: Thu 18 Jun 2026 10:49:09 UTC

Command: aztec

Table of Contents​

aztec​

Aztec command line interface

Usage:

aztec [options] [command]

Available Commands:

  • add-l1-validator [options] - Adds a validator to the L1 rollup contract via a direct deposit.
  • advance-epoch [options] - Use L1 cheat codes to warp time until the next epoch.
  • block-number [options] - Gets the current Aztec L2 block number.
  • bridge-erc20 [options] <amount> <recipient> - Bridges ERC20 tokens to L2.
  • codegen [options] <noir-abi-path> - Validates and generates an Aztec Contract ABI from Noir ABI.
  • compile [nargo-args...] - Compile Aztec Noir contracts using nargo and postprocess them to generate transpiled artifacts and verification keys. All options are forwarded to nargo compile.
  • compute-genesis-values [options] - Computes genesis values (VK tree root, protocol contracts hash, genesis archive root).
  • compute-selector <functionSignature> - Given a function signature, it computes a selector
  • debug-rollup [options] - Debugs the rollup contract.
  • decode-enr <enr> - Decodes an ENR record
  • deploy-l1-contracts [options] - Deploys all necessary Ethereum contracts for Aztec.
  • deploy-new-rollup [options] - Deploys a new rollup contract and adds it to the registry (if you are the owner).
  • deposit-governance-tokens [options] - Deposits governance tokens to the governance contract.
  • example-contracts - Lists the example contracts available to deploy from @aztec/noir-contracts.js
  • execute-governance-proposal [options] - Executes a governance proposal.
  • fast-forward-epochs [options] - Fast forwards the epoch of the L1 rollup contract.
  • generate-bls-keypair [options] - Generate a BLS keypair with convenience flags
  • generate-bootnode-enr [options] <privateKey> <p2pIp> <p2pPort> - Generates the encoded ENR record for a bootnode.
  • generate-keys [options] - Generates encryption and signing private keys.
  • generate-l1-account [options] - Generates a new private key for an account on L1.
  • generate-p2p-private-key - Generates a LibP2P peer private key.
  • generate-secret-and-hash - Generates an arbitrary secret (Fr), and its hash (using aztec-nr defaults)
  • get-block [options] [blockNumber] - Gets info for a given block or latest.
  • get-canonical-sponsored-fpc-address - Gets the canonical SponsoredFPC address for this any testnet running on the same version as this CLI
  • get-current-min-fee [options] - Gets the current base fee.
  • get-l1-addresses [options] - Gets the addresses of the L1 contracts.
  • get-l1-balance [options] <who> - Gets the balance of an ERC token in L1 for the given Ethereum address.
  • get-l1-to-l2-message-witness [options] - Gets a L1 to L2 message witness.
  • get-logs [options] - Gets public logs for a contract and tag, optionally restricted by block range or tx hash.
  • get-node-info [options] - Gets the information of an Aztec node from a PXE or directly from an Aztec node.
  • help [command] - display help for command
  • init - creates a new Aztec Noir workspace in the current directory.
  • inspect-contract <contractArtifactFile> - Shows list of external callable functions for a contract
  • migrate-ha-db - Run validator-ha-signer database migrations
  • new <name> - creates a new Aztec Noir workspace in its own directory (or creates a new contract-test crates pair and adds it to the current workspace if run in workspace).
  • parse-parameter-struct [options] <encodedString> - Helper for parsing an encoded string into a contract's parameter struct.
  • preload-crs - Preload the points data needed for proving and verifying
  • profile - Profile compiled Aztec artifacts.
  • propose-with-lock [options] - Makes a proposal to governance with a lock
  • prune-rollup [options] - Prunes the pending chain on the rollup contract.
  • remove-l1-validator [options] - Removes a validator to the L1 rollup contract.
  • sequencers [options] <command> [who] - Manages or queries registered sequencers on the L1 rollup contract.
  • setup-protocol-contracts [options] - Bootstrap the blockchain by initializing all the protocol contracts
  • start [options] - Starts Aztec modules. Options for each module can be set as key-value pairs (e.g. "option1=value1,option2=value2") or as environment variables.
  • test [options] - starts a TXE and runs "nargo test" using it as the oracle resolver.
  • trigger-seed-snapshot [options] - Triggers a seed snapshot for the next epoch.
  • update [options] [projectPath] - Updates Nodejs and Noir dependencies
  • validator-keys|valKeys - Manage validator keystores for node operators
  • vote-on-governance-proposal [options] - Votes on a governance proposal.

Options:

  • -V --version - output the version number
  • -h --help - display help for command

Subcommands​

aztec add-l1-validator​

Adds a validator to the L1 rollup contract via a direct deposit.

Usage:

aztec add-l1-validator [options]

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • --network <string> - Network to execute against (env: NETWORK)
  • -pk, --private-key <string> - The private key to use sending the transaction
  • -m, --mnemonic <string> - The mnemonic to use sending the transaction (default: "test test test test test test test test test test test junk")
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --attester <address> - ethereum address of the attester
  • --withdrawer <address> - ethereum address of the withdrawer
  • --bls-secret-key <string> - The BN254 scalar field element used as a secret key for BLS signatures. Will be associated with the attester address.
  • --move-with-latest-rollup - Whether to move with the latest rollup (default: true)
  • --rollup <string> - Rollup contract address
  • -h, --help - display help for command

aztec advance-epoch​

Use L1 cheat codes to warp time until the next epoch.

Usage:

aztec advance-epoch [options]

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • -h, --help - display help for command

aztec block-number​

Gets the current Aztec L2 block number.

Usage:

aztec block-number [options]

Options:

  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • -h, --help - display help for command

aztec bridge-erc20​

Bridges ERC20 tokens to L2.

Usage:

aztec bridge-erc20 [options] <amount> <recipient>

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -m, --mnemonic <string> - The mnemonic to use for deriving the Ethereum address that will mint and bridge (default: "test test test test test test test test test test test junk")
  • --mint - Mint the tokens on L1 (default: false)
  • --private - If the bridge should use the private flow (default: false)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -t, --token <string> - The address of the token to bridge
  • -p, --portal <string> - The address of the portal contract
  • -f, --faucet <string> - The address of the faucet contract (only used if minting)
  • --l1-private-key <string> - The private key to use for deployment
  • --json - Output the claim in JSON format
  • -h, --help - display help for command

aztec codegen​

Validates and generates an Aztec Contract ABI from Noir ABI.

Usage:

aztec codegen [options] <noir-abi-path>

Options:

  • -o, --outdir <path> - Output folder for the generated code.
  • -f, --force - Force code generation even when the contract has not changed.
  • -h, --help - display help for command

aztec compile​

Compile Aztec Noir contracts using nargo and postprocess them to generate transpiled artifacts and verification keys. All options are forwarded to nargo compile.

Usage:

aztec compile [options] [nargo-args...]

Options:

  • -h, --help - display help for command
  • --package <PACKAGE> - The name of the package to run the command on. By default run on the first one found moving up along the ancestors of the current directory
  • --workspace - Run on all packages in the workspace
  • --force - Force a full recompilation
  • --print-acir - Display the ACIR for compiled circuit, including the Brillig bytecode
  • --deny-warnings - Treat all warnings as errors
  • --silence-warnings - Suppress warnings
  • --debug-comptime-in-file <DEBUG_COMPTIME_IN_FILE> - Enable printing results of comptime evaluation: provide a path suffix for the module to debug, e.g. "package_name/src/main.nr"
  • --skip-underconstrained-check - Flag to turn off the compiler check for under constrained values. Warning: This can improve compilation speed but can also lead to correctness errors. This check should always be run on production code
  • --skip-brillig-constraints-check - Flag to turn off the compiler check for missing Brillig call constraints. Warning: This can improve compilation speed but can also lead to correctness errors. This check should always be run on production code
  • --count-array-copies - Count the number of arrays that are copied in an unconstrained context for performance debugging
  • --inliner-aggressiveness <INLINER_AGGRESSIVENESS> - Setting to decide on an inlining strategy for Brillig functions. A more aggressive inliner should generate larger programs but more optimized A less aggressive inliner should generate smaller programs [default: 9223372036854775807]
  • -Z, --unstable-features <UNSTABLE_FEATURES> - Unstable features to enable for this current build. If non-empty, it disables unstable features required in crate manifests.
  • --no-unstable-features - Disable any unstable features required in crate manifests
  • -h, --help - Print help (see a summary with '-h')

aztec compute-genesis-values​

Computes genesis values (VK tree root, protocol contracts hash, genesis archive root).

Usage:

aztec compute-genesis-values [options]

Options:

  • --test-accounts <boolean> - Include initial test accounts in genesis state (env: TEST_ACCOUNTS)
  • --sponsored-fpc <boolean> - Include sponsored FPC contract in genesis state (env: SPONSORED_FPC)
  • -h, --help - display help for command

aztec compute-selector​

Given a function signature, it computes a selector

Usage:

aztec compute-selector [options] <functionSignature>

Options:

  • -h, --help - display help for command

aztec debug-rollup​

Debugs the rollup contract.

Usage:

aztec debug-rollup [options]

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --rollup <address> - ethereum address of the rollup contract
  • -h, --help - display help for command

aztec decode-enr​

Decodes and ENR record

Usage:

aztec decode-enr [options] <enr>

Options:

  • -h, --help - display help for command

aztec deploy-l1-contracts​

Deploys all necessary Ethereum contracts for Aztec.

Usage:

aztec deploy-l1-contracts [options]

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -pk, --private-key <string> - The private key to use for deployment
  • --validators <string> - Comma separated list of validators
  • -m, --mnemonic <string> - The mnemonic to use in deployment (default: "test test test test test test test test test test test junk")
  • -i, --mnemonic-index <number> - The index of the mnemonic to use in deployment (default: 0)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --json - Output the contract addresses in JSON format
  • --test-accounts - Populate genesis state with initial fee juice for test accounts
  • --sponsored-fpc - Populate genesis state with a testing sponsored FPC contract
  • --real-verifier - Deploy the real verifier (default: false)
  • --existing-token <address> - Use an existing ERC20 for both fee and staking
  • -h, --help - display help for command

aztec deploy-new-rollup​

Deploys a new rollup contract and adds it to the registry (if you are the owner).

Usage:

aztec deploy-new-rollup [options]

Options:

  • -r, --registry-address <string> - The address of the registry contract
  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -pk, --private-key <string> - The private key to use for deployment
  • --validators <string> - Comma separated list of validators
  • -m, --mnemonic <string> - The mnemonic to use in deployment (default: "test test test test test test test test test test test junk")
  • -i, --mnemonic-index <number> - The index of the mnemonic to use in deployment (default: 0)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --json - Output the contract addresses in JSON format
  • --test-accounts - Populate genesis state with initial fee juice for test accounts
  • --sponsored-fpc - Populate genesis state with a testing sponsored FPC contract
  • --real-verifier - Deploy the real verifier (default: false)
  • -h, --help - display help for command

aztec deposit-governance-tokens​

Deposits governance tokens to the governance contract.

Usage:

aztec deposit-governance-tokens [options]

Options:

  • -r, --registry-address <string> - The address of the registry contract
  • --recipient <string> - The recipient of the tokens
  • -a, --amount <string> - The amount of tokens to deposit
  • --mint - Mint the tokens on L1 (default: false)
  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -p, --private-key <string> - The private key to use to deposit
  • -m, --mnemonic <string> - The mnemonic to use to deposit (default: "test test test test test test test test test test test junk")
  • -i, --mnemonic-index <number> - The index of the mnemonic to use to deposit (default: 0)
  • -h, --help - display help for command

aztec example-contracts​

Lists the example contracts available to deploy from @aztec/noir-contracts.js

Usage:

aztec example-contracts [options]

Options:

  • -h, --help - display help for command

aztec execute-governance-proposal​

Executes a governance proposal.

Usage:

aztec execute-governance-proposal [options]

Options:

  • -p, --proposal-id <string> - The ID of the proposal
  • -r, --registry-address <string> - The address of the registry contract
  • --wait <boolean> - Whether to wait until the proposal is executable
  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -pk, --private-key <string> - The private key to use to vote
  • -m, --mnemonic <string> - The mnemonic to use to vote (default: "test test test test test test test test test test test junk")
  • -i, --mnemonic-index <number> - The index of the mnemonic to use to vote (default: 0)
  • -h, --help - display help for command

aztec fast-forward-epochs​

Help for this command is currently unavailable due to a technical issue with option serialization.

aztec generate-bls-keypair​

Generate a BLS keypair with convenience flags

Usage:

aztec generate-bls-keypair [options]

Options:

  • --mnemonic <mnemonic> - Mnemonic for BLS derivation
  • --ikm <hex> - Initial keying material for BLS (alternative to mnemonic)
  • --bls-path <path> - EIP-2334 path (default m/12381/3600/0/0/0)
  • --g2 - Derive on G2 subgroup
  • --compressed - Output compressed public key
  • --json - Print JSON output to stdout
  • --out <file> - Write output to file
  • -h, --help - display help for command

aztec generate-bootnode-enr​

Generates the encoded ENR record for a bootnode.

Usage:

aztec generate-bootnode-enr [options] <privateKey> <p2pIp> <p2pPort>

Options:

  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -h, --help - display help for command

aztec generate-keys​

Generates and encryption and signing private key pair.

Usage:

aztec generate-keys [options]

Options:

  • --json - Output the keys in JSON format
  • -h, --help - display help for command

aztec generate-l1-account​

Generates a new private key for an account on L1.

Usage:

aztec generate-l1-account [options]

Options:

  • --json - Output the private key in JSON format
  • -h, --help - display help for command

aztec generate-p2p-private-key​

Generates a private key that can be used for running a node on a LibP2P network.

Usage:

aztec generate-p2p-private-key [options]

Options:

  • -h, --help - display help for command

aztec generate-secret-and-hash​

Generates an arbitrary secret (Fr), and its hash (using aztec-nr defaults)

Usage:

aztec generate-secret-and-hash [options]

Options:

  • -h, --help - display help for command

aztec get-block​

Gets info for a given block or latest.

Usage:

aztec get-block [options] [blockNumber]

Options:

  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • -h, --help - display help for command

aztec get-canonical-sponsored-fpc-address​

Gets the canonical SponsoredFPC address for this any testnet running on the same version as this CLI

Usage:

aztec get-canonical-sponsored-fpc-address [options]

Options:

  • -h, --help - display help for command

aztec get-current-min-fee​

Gets the current base fee.

Usage:

aztec get-current-min-fee [options]

Options:

  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • -h, --help - display help for command

aztec get-l1-addresses​

Gets the addresses of the L1 contracts.

Usage:

aztec get-l1-addresses [options]

Options:

  • -r, --registry-address <string> - The address of the registry contract
  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -v, --rollup-version <number> - The version of the rollup
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --json - Output the addresses in JSON format
  • -h, --help - display help for command

aztec get-l1-balance​

Gets the balance of an ERC token in L1 for the given Ethereum address.

Usage:

aztec get-l1-balance [options] <who>

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -t, --token <string> - The address of the token to check the balance of
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --json - Output the balance in JSON format
  • -h, --help - display help for command

aztec get-l1-to-l2-message-witness​

Gets a L1 to L2 message witness.

Usage:

aztec get-l1-to-l2-message-witness [options]

Options:

  • -ca, --contract-address <address> - Aztec address of the contract.
  • --message-hash <messageHash> - The L1 to L2 message hash.
  • --secret <secret> - The secret used to claim the L1 to L2 message
  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • -h, --help - display help for command

aztec get-logs​

Gets public logs for a contract and tag, optionally restricted by block range or tx hash.

Usage:

aztec get-logs [options]

Options:

  • -ca, --contract-address <address> - Contract address that emitted the logs.
  • --tag <tag> - Tag (Fr value) to filter logs by.
  • -tx, --tx-hash <txHash> - A transaction hash to restrict the search to.
  • -fb, --from-block <blockNum> - Initial block number for getting logs (defaults to 1).
  • -tb, --to-block <blockNum> - Up to which block to fetch logs (defaults to latest). <blockNumber>-<txIndexWithinBlock>-<logIndexWithinTx> to resume pagination after.
  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • --follow - If set, will keep polling for new logs until interrupted.
  • -h, --help - display help for command

aztec get-node-info​

Gets the information of an Aztec node from a PXE or directly from an Aztec node.

Usage:

aztec get-node-info [options]

Options:

  • --json - Emit output as json
  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • -h, --help - display help for command

aztec init​

Aztec Init - Create a new Aztec Noir project in the current directory

Usage:

aztec init

Options:

  • -h, --help - Print help

aztec inspect-contract​

Shows list of external callable functions for a contract

Usage:

aztec inspect-contract [options] <contractArtifactFile>

Options:

  • -h, --help - display help for command

aztec migrate-ha-db​

Run validator-ha-signer database migrations

Usage:

aztec migrate-ha-db [options] [command]

Available Commands:

  • down [options] - Rollback the last migration
  • help [command] - display help for command
  • up [options] - Apply pending migrations

Options:

  • -h --help - display help for command

Subcommands​

aztec migrate-ha-db down​

Rollback the last migration

Usage:

aztec migrate-ha-db down [options]

Options:

  • --database-url <string> - PostgreSQL connection string
  • --verbose - Enable verbose output (default: false)
  • -h, --help - display help for command

aztec migrate-ha-db up​

Apply pending migrations

Usage:

aztec migrate-ha-db up [options]

Options:

  • --database-url <string> - PostgreSQL connection string
  • --verbose - Enable verbose output (default: false)
  • -h, --help - display help for command

aztec new​

Aztec New - Create a new Aztec Noir project or add a contract to an existing workspace

Usage:

aztec new <NAME>

Options:

  • -h, --help - Print help

aztec parse-parameter-struct​

Helper for parsing an encoded string into a contract's parameter struct.

Usage:

aztec parse-parameter-struct [options] <encodedString>

Options:

  • -c, --contract-artifact <fileLocation> - A compiled Aztec.nr contract's ABI in JSON format or name of a contract ABI exported by @aztec/noir-contracts.js
  • -p, --parameter <parameterName> - The name of the struct parameter to decode into
  • -h, --help - display help for command

aztec preload-crs​

Preload the points data needed for proving and verifying

Usage:

aztec preload-crs [options]

Options:

  • -h, --help - display help for command

aztec profile​

Profile compiled Aztec artifacts.

Usage:

aztec profile [options] [command]

Available Commands:

  • flamegraph <contract-artifact> <function> - Generate a gate count flamegraph SVG for a contract function.
  • gates [options] [target-dir] - Display gate counts for all compiled Aztec artifacts in a target directory.
  • help [command] - display help for command

Options:

  • -h --help - display help for command

Subcommands​

aztec profile flamegraph​

Generate a gate count flamegraph SVG for a contract function.

Usage:

aztec profile flamegraph [options] <contract-artifact> <function>

Options:

  • -h, --help - display help for command

aztec profile gates​

Display gate counts for all compiled Aztec artifacts in a target directory.

Usage:

aztec profile gates [options] [target-dir]

Options:

  • --json - Output gate counts as JSON instead of a table (default: false)
  • -h, --help - display help for command

aztec propose-with-lock​

Makes a proposal to governance with a lock

Usage:

aztec propose-with-lock [options]

Options:

  • -r, --registry-address <string> - The address of the registry contract
  • -p, --payload-address <string> - The address of the payload contract
  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -pk, --private-key <string> - The private key to use to propose
  • -m, --mnemonic <string> - The mnemonic to use to propose (default: "test test test test test test test test test test test junk")
  • -i, --mnemonic-index <number> - The index of the mnemonic to use to propose (default: 0)
  • --json - Output the proposal ID in JSON format
  • -h, --help - display help for command

aztec prune-rollup​

Prunes the pending chain on the rollup contract.

Usage:

aztec prune-rollup [options]

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -pk, --private-key <string> - The private key to use for deployment
  • -m, --mnemonic <string> - The mnemonic to use in deployment (default: "test test test test test test test test test test test junk")
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --rollup <address> - ethereum address of the rollup contract
  • -h, --help - display help for command

aztec remove-l1-validator​

Removes a validator to the L1 rollup contract.

Usage:

aztec remove-l1-validator [options]

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -pk, --private-key <string> - The private key to use for deployment
  • -m, --mnemonic <string> - The mnemonic to use in deployment (default: "test test test test test test test test test test test junk")
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • --validator <address> - ethereum address of the validator
  • --rollup <address> - ethereum address of the rollup contract
  • -h, --help - display help for command

aztec sequencers​

Manages or queries registered sequencers on the L1 rollup contract.

Usage:

aztec sequencers [options] <command> [who]

Options:

  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"])
  • -m, --mnemonic <string> - The mnemonic for the sender of the tx (default: "test test test test test test test test test test test junk")
  • --block-number <number> - Block number to query next sequencer for
  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -h, --help - display help for command

aztec setup-protocol-contracts​

Bootstrap the blockchain by initializing all the protocol contracts

Usage:

aztec setup-protocol-contracts [options]

Options:

  • -n, --node-url <string> - URL of the Aztec node (default: "http://localhost:8080", env: AZTEC_NODE_URL)
  • --testAccounts - Deploy funded test accounts.
  • --json - Output the contract addresses in JSON format
  • -h, --help - display help for command

aztec start​

MISC

  • --network <value> Network to run Aztec on Environment: $NETWORK

  • --enable-version-check (default: true) Check if the node is running the latest version and is following the latest rollup Environment: $ENABLE_VERSION_CHECK

  • --sync-mode <value> (default: snapshot) Set sync mode to full to always sync via L1, snapshot to download a snapshot if there is no local data, force-snapshot to download even if there is local data. Environment: $SYNC_MODE

  • --snapshots-urls <value> Base URLs for snapshots index, comma-separated. Environment: $SYNC_SNAPSHOTS_URLS

  • --fisherman-mode Whether to run in fisherman mode. Environment: $FISHERMAN_MODE

  • --local-network Starts Aztec Local Network

  • --local-network.l1Mnemonic <value> (default: test test test test test test test test test test test junk) Mnemonic for L1 accounts. Will be used Environment: $MNEMONIC

  • --local-network.testAccounts (default: true) Deploy test accounts on local network start Environment: $TEST_ACCOUNTS

API

  • --port <value> (default: 8080) Port to run the Aztec Services on Environment: $AZTEC_PORT

  • --admin-port <value> (default: 8880) Port to run admin APIs of Aztec Services on Environment: $AZTEC_ADMIN_PORT

  • --admin-api-key-hash <value> SHA-256 hex hash of a pre-generated admin API key. When set, the node uses this hash for authentication instead of auto-generating a key. Environment: $AZTEC_ADMIN_API_KEY_HASH

  • --disable-admin-api-key Disable API key authentication on the admin RPC endpoint. By default, a key is auto-generated, displayed once, and its hash is persisted. Environment: $AZTEC_DISABLE_ADMIN_API_KEY

  • --reset-admin-api-key Force-generate a new admin API key, replacing any previously persisted key hash. The new key is displayed once at startup. Environment: $AZTEC_RESET_ADMIN_API_KEY

  • --node-debug Expose debug endpoints (e.g. mineBlock) on the main RPC port Environment: $AZTEC_NODE_DEBUG

  • --api-prefix <value> Prefix for API routes on any service that is started Environment: $API_PREFIX

  • --rpcMaxBatchSize <value> (default: 100) Maximum allowed batch size for JSON RPC batch requests. Environment: $RPC_MAX_BATCH_SIZE

  • --rpcMaxBodySize <value> (default: 1mb) Maximum allowed batch size for JSON RPC batch requests. Environment: $RPC_MAX_BODY_SIZE

ETHEREUM

  • --l1-chain-id <value> The chain ID of the ethereum host. Environment: $L1_CHAIN_ID

  • --l1-rpc-urls <value> List of URLs of Ethereum RPC nodes that services will connect to (comma separated). Environment: $ETHEREUM_HOSTS

  • --l1-consensus-host-urls <value> List of URLs of the Ethereum consensus nodes that services will connect to (comma separated) Environment: $L1_CONSENSUS_HOST_URLS

  • --l1-consensus-host-api-keys <value> List of API keys for the corresponding L1 consensus clients, if needed. Added to the end of the corresponding URL as "?key=<api-key>" unless a header is defined Environment: $L1_CONSENSUS_HOST_API_KEYS

  • --l1-consensus-host-api-key-headers <value> List of header names for the corresponding L1 consensus client API keys, if needed. Added to the corresponding request as "<api-key-header>: <api-key>" Environment: $L1_CONSENSUS_HOST_API_KEY_HEADERS

  • --registry-address <value> The deployed L1 registry contract address. Environment: $REGISTRY_CONTRACT_ADDRESS

  • --rollup-version <value> The version of the rollup. Environment: $ROLLUP_VERSION

STORAGE

  • --data-directory <value> Optional dir to store data. If omitted will store in memory. Environment: $DATA_DIRECTORY

  • --data-store-map-size-kb <value> (default: 134217728) The maximum possible size of a data store DB in KB. Can be overridden by component-specific options. Environment: $DATA_STORE_MAP_SIZE_KB

WORLD STATE

  • --world-state-data-directory <value> Optional directory for the world state database Environment: $WS_DATA_DIRECTORY

  • --world-state-db-map-size-kb <value> The maximum possible size of the world state DB in KB. Overwrites the general dataStoreMapSizeKb. Environment: $WS_DB_MAP_SIZE_KB

  • --world-state-checkpoint-history <value> (default: 64) The number of historic checkpoints worth of blocks to maintain. Values less than 1 mean all history is maintained Environment: $WS_NUM_HISTORIC_CHECKPOINTS

AZTEC NODE

  • --node Starts Aztec Node with options

ARCHIVER

  • --archiver.blobSinkMapSizeKb <value> The maximum possible size of the blob sink DB in KB. Overwrites the general dataStoreMapSizeKb. Environment: $BLOB_SINK_MAP_SIZE_KB

  • --archiver.blobAllowEmptySources <value> Whether to allow having no blob sources configured during startup Environment: $BLOB_ALLOW_EMPTY_SOURCES

  • --archiver.blobFileStoreUrls <value> URLs for filestore blob archive, comma-separated. Tried in order until blobs are found. Environment: $BLOB_FILE_STORE_URLS

  • --archiver.blobFileStoreUploadUrl <value> URL for uploading blobs to filestore (s3://, gs://, file://) Environment: $BLOB_FILE_STORE_UPLOAD_URL

  • --archiver.blobHealthcheckUploadIntervalMinutes <value> Interval in minutes for uploading healthcheck file to file store (default: 60 = 1 hour) Environment: $BLOB_HEALTHCHECK_UPLOAD_INTERVAL_MINUTES

  • --archiver.blobPreferFilestores <value> Whether to prefer filestores over consensus clients when fetching blobs. Default: false. Environment: $BLOB_PREFER_FILESTORES

  • --archiver.blobFileStoreTimeoutMs <value> Timeout in ms for HTTP requests to the blob file store. Default: 10000 (10s). Environment: $BLOB_FILE_STORE_TIMEOUT_MS

  • --archiver.archiveApiUrl <value> The URL of the archive API Environment: $BLOB_ARCHIVE_API_URL

  • --archiver.archiverPollingIntervalMS <value> (default: 500) The polling interval in ms for retrieving new L2 blocks and encrypted logs. Environment: $ARCHIVER_POLLING_INTERVAL_MS

  • --archiver.archiverBatchSize <value> (default: 100) The number of L2 blocks the archiver will attempt to download at a time. Environment: $ARCHIVER_BATCH_SIZE

  • --archiver.archiverStoreMapSizeKb <value> The maximum possible size of the archiver DB in KB. Overwrites the general dataStoreMapSizeKb. Environment: $ARCHIVER_STORE_MAP_SIZE_KB

  • --archiver.blockDurationMs <value> Duration per block in milliseconds when building multiple blocks per slot. Used to derive orphan proposed block pruning timing. Environment: $SEQ_BLOCK_DURATION_MS

  • --archiver.checkpointProposalSyncGraceSeconds <value> Consensus grace in seconds for a received checkpoint proposal to materialize into local proposed state. Environment: $CHECKPOINT_PROPOSAL_SYNC_GRACE_SECONDS

  • --archiver.skipValidateCheckpointAttestations <value> Skip validating checkpoint attestations (for testing purposes only)

  • --archiver.skipPromoteProposedCheckpointDuringL1Sync <value> Skip promoting proposed checkpoints during L1 sync (for testing purposes only)

  • --archiver.maxAllowedEthClientDriftSeconds <value> (default: 300) Maximum allowed drift in seconds between the Ethereum client and current time. Environment: $MAX_ALLOWED_ETH_CLIENT_DRIFT_SECONDS

  • --archiver.ethereumAllowNoDebugHosts <value> (default: true) Whether to allow starting the archiver without debug/trace method support on Ethereum hosts Environment: $ETHEREUM_ALLOW_NO_DEBUG_HOSTS

  • --archiver.archiverSkipHistoricalLogsCheck <value> Skip the startup check that probes the L1 RPC for historical Rollup contract logs. Set to true to bypass the check when the connected RPC node is known to prune old logs. Environment: $ARCHIVER_SKIP_HISTORICAL_LOGS_CHECK

  • --archiver.orphanPruneNoProposalTolerance <value> (default: 1) Local tolerance in seconds before pruning an orphan block when no checkpoint proposal was received. Environment: $ARCHIVER_ORPHAN_PRUNE_NO_PROPOSAL_TOLERANCE

  • --archiver.skipOrphanProposedBlockPruning <value> Skip pruning orphan proposed blocks that have no matching proposed checkpoint. Environment: $ARCHIVER_SKIP_ORPHAN_PROPOSED_BLOCK_PRUNING

SEQUENCER

  • --sequencer Starts Aztec Sequencer with options

  • --sequencer.blockDurationMs <value> (default: 3000) Duration per block in milliseconds, used to derive how many blocks fit in a slot. Environment: $SEQ_BLOCK_DURATION_MS

  • --sequencer.validatorPrivateKeys <value> (default: [Redacted]) List of private keys of the validators participating in attestation duties Environment: $VALIDATOR_PRIVATE_KEYS

  • --sequencer.validatorAddresses <value> List of addresses of the validators to use with remote signers Environment: $VALIDATOR_ADDRESSES

  • --sequencer.disableValidator <value> Do not run the validator Environment: $VALIDATOR_DISABLED

  • --sequencer.disabledValidators <value> Temporarily disable these specific validator addresses

  • --sequencer.attestationPollingIntervalMs <value> (default: 200) Interval between polling for new attestations Environment: $VALIDATOR_ATTESTATIONS_POLLING_INTERVAL_MS

  • --sequencer.alwaysReexecuteBlockProposals <value> (default: true) Whether to always reexecute block proposals, even for non-validator nodes (useful for monitoring network status).

  • --sequencer.skipCheckpointProposalValidation <value> Skip checkpoint proposal validation and always attest (default: false)

  • --sequencer.skipPushProposedBlocksToArchiver <value> Skip pushing proposed blocks to archiver (default: true)

  • --sequencer.attestToEquivocatedProposals <value> Agree to attest to equivocated checkpoint proposals (for testing purposes only)

  • --sequencer.skipProposalSlotValidation <value> Accept proposal validation regardless of slot timing (for testing only)

  • --sequencer.validateMaxL2BlockGas <value> Maximum L2 block gas for validation. Proposals exceeding this limit are rejected. Environment: $VALIDATOR_MAX_L2_BLOCK_GAS

  • --sequencer.validateMaxDABlockGas <value> Maximum DA block gas for validation. Proposals exceeding this limit are rejected. Environment: $VALIDATOR_MAX_DA_BLOCK_GAS

  • --sequencer.validateMaxTxsPerBlock <value> Maximum transactions per block for validation. Proposals exceeding this limit are rejected. Environment: $VALIDATOR_MAX_TX_PER_BLOCK

  • --sequencer.validateMaxTxsPerCheckpoint <value> Maximum transactions per checkpoint for validation. Proposals exceeding this limit are rejected. Environment: $VALIDATOR_MAX_TX_PER_CHECKPOINT

  • --sequencer.nodeId <value> The unique identifier for this node Environment: $VALIDATOR_HA_NODE_ID

  • --sequencer.pollingIntervalMs <value> (default: 100) The number of ms to wait between polls when a duty is being signed Environment: $VALIDATOR_HA_POLLING_INTERVAL_MS

  • --sequencer.signingTimeoutMs <value> (default: 3000) The maximum time to wait for a duty being signed to complete Environment: $VALIDATOR_HA_SIGNING_TIMEOUT_MS

  • --sequencer.maxStuckDutiesAgeMs <value> The maximum age of a stuck duty in ms (defaults to 2x Aztec slot duration) Environment: $VALIDATOR_HA_MAX_STUCK_DUTIES_AGE_MS

  • --sequencer.cleanupOldDutiesAfterHours <value> Optional: clean up old duties after this many hours (disabled if not set) Environment: $VALIDATOR_HA_OLD_DUTIES_MAX_AGE_H

  • --sequencer.signingProtectionMapSizeKb <value> Maximum size of the local signing-protection LMDB store in KB. Overwrites the general dataStoreMapSizeKb. Environment: $SIGNING_PROTECTION_MAP_SIZE_KB

  • --sequencer.haSigningEnabled <value> Whether HA signing / slashing protection is enabled Environment: $VALIDATOR_HA_SIGNING_ENABLED

  • --sequencer.databaseUrl <value> PostgreSQL connection string for validator HA signer (format: postgresql://user:password@host:port/database) Environment: $VALIDATOR_HA_DATABASE_URL

  • --sequencer.poolMaxCount <value> (default: 10) Maximum number of clients in the pool Environment: $VALIDATOR_HA_POOL_MAX

  • --sequencer.poolMinCount <value> Minimum number of clients in the pool Environment: $VALIDATOR_HA_POOL_MIN

  • --sequencer.poolIdleTimeoutMs <value> (default: 10000) Idle timeout in milliseconds Environment: $VALIDATOR_HA_POOL_IDLE_TIMEOUT_MS

  • --sequencer.poolConnectionTimeoutMs <value> Connection timeout in milliseconds (0 means no timeout) Environment: $VALIDATOR_HA_POOL_CONNECTION_TIMEOUT_MS

  • --sequencer.sequencerPollingIntervalMS <value> (default: 500) The number of ms to wait between polling for checking to build on the next slot. Environment: $SEQ_POLLING_INTERVAL_MS

  • --sequencer.maxTxsPerCheckpoint <value> The maximum number of txs across all blocks in a checkpoint. Environment: $SEQ_MAX_TX_PER_CHECKPOINT

  • --sequencer.minTxsPerBlock <value> (default: 1) The minimum number of txs to include in a block. Environment: $SEQ_MIN_TX_PER_BLOCK

  • --sequencer.minValidTxsPerBlock <value> The minimum number of valid txs (after execution) to include in a block. If not set, falls back to minTxsPerBlock.

  • --sequencer.publishTxsWithProposals <value> Whether to publish txs with proposals. Environment: $SEQ_PUBLISH_TXS_WITH_PROPOSALS

  • --sequencer.maxL2BlockGas <value> The maximum L2 block gas. Environment: $SEQ_MAX_L2_BLOCK_GAS

  • --sequencer.maxDABlockGas <value> The maximum DA block gas. Environment: $SEQ_MAX_DA_BLOCK_GAS

  • --sequencer.perBlockAllocationMultiplier <value> (default: 1.2) Per-block gas budget multiplier for both L2 and DA gas. Budget per block is (checkpointLimit / maxBlocks) * multiplier. Values greater than one allow early blocks to use more than their even share, relying on checkpoint-level capping for later blocks. Environment: $SEQ_PER_BLOCK_ALLOCATION_MULTIPLIER

  • --sequencer.perBlockDAAllocationMultiplier <value> (default: 1.5) Per-block budget multiplier applied to DA gas and blob fields in place of perBlockAllocationMultiplier. Defaults higher than the general multiplier so the largest contract class deploy fits a single block. Environment: $SEQ_PER_BLOCK_DA_ALLOCATION_MULTIPLIER

  • --sequencer.redistributeCheckpointBudget <value> (default: true) Redistribute remaining checkpoint budget evenly across remaining blocks instead of allowing a single block to consume the entire remaining budget. Environment: $SEQ_REDISTRIBUTE_CHECKPOINT_BUDGET

  • --sequencer.coinbase <value> Recipient of block reward. Environment: $COINBASE

  • --sequencer.feeRecipient <value> Address to receive fees. Environment: $FEE_RECIPIENT

  • --sequencer.acvmWorkingDirectory <value> The working directory to use for simulation/proving Environment: $ACVM_WORKING_DIRECTORY

  • --sequencer.acvmBinaryPath <value> The path to the ACVM binary Environment: $ACVM_BINARY_PATH

  • --sequencer.governanceProposerPayload <value> The address of the payload for the governanceProposer Environment: $GOVERNANCE_PROPOSER_PAYLOAD_ADDRESS

  • --sequencer.l1PublishingTime <value> (default: 12) How much time in seconds to allow in the slot for publishing the L1 transaction. Environment: $SEQ_L1_PUBLISHING_TIME_ALLOWANCE_IN_SLOT

  • --sequencer.secondsBeforeInvalidatingBlockAsCommitteeMember <value> (default: 144) How many seconds to wait before trying to invalidate a block from the pending chain as a committee member (zero to never invalidate). The next proposer is expected to invalidate, so the committee acts as a fallback. Environment: $SEQ_SECONDS_BEFORE_INVALIDATING_BLOCK_AS_COMMITTEE_MEMBER

  • --sequencer.secondsBeforeInvalidatingBlockAsNonCommitteeMember <value> (default: 432) How many seconds to wait before trying to invalidate a block from the pending chain as a non-committee member (zero to never invalidate). The next proposer is expected to invalidate, then the committee, so other sequencers act as a fallback. Environment: $SEQ_SECONDS_BEFORE_INVALIDATING_BLOCK_AS_NON_COMMITTEE_MEMBER

  • --sequencer.skipWaitForValidParentCheckpointOnL1 <value> Bypass the parent checkpoint validity check before submitting a pipelined checkpoint, allowing the proposer to publish even when the parent landed on L1 with invalid attestations (for testing only)

  • --sequencer.broadcastInvalidBlockProposal <value> Broadcast invalid block proposals with corrupted state (for testing only)

  • --sequencer.invalidBlockProposalIndexWithinCheckpoint <value> Broadcast an invalid block proposal only at this indexWithinCheckpoint (for testing only)

  • --sequencer.broadcastInvalidCheckpointProposalOnly <value> Broadcast invalid checkpoint proposals while keeping the underlying block proposals valid (for testing only). When unset, the checkpoint follows broadcastInvalidBlockProposal.

  • --sequencer.injectFakeAttestation <value> Inject a fake attestation (for testing only)

  • --sequencer.injectHighSValueAttestation <value> Inject a malleable attestation with a high-s value (for testing only)

  • --sequencer.injectUnrecoverableSignatureAttestation <value> Inject an attestation with an unrecoverable signature (for testing only)

  • --sequencer.shuffleAttestationOrdering <value> Shuffle attestation ordering to create invalid ordering (for testing only)

  • --sequencer.expectedBlockProposalsPerSlot <value> Expected number of block proposals per slot for P2P peer scoring. 0 (default) disables block proposal scoring. Set to a positive value to enable. Environment: $SEQ_EXPECTED_BLOCK_PROPOSALS_PER_SLOT

  • --sequencer.checkpointProposalSyncGraceSeconds <value> (default: 6) Consensus grace in seconds for a received checkpoint proposal to materialize into local proposed state. Defaults to twice the block duration. Environment: $CHECKPOINT_PROPOSAL_SYNC_GRACE_SECONDS

  • --sequencer.maxTxsPerBlock <value> The maximum number of txs to include in a block. Environment: $SEQ_MAX_TX_PER_BLOCK

  • --sequencer.attestationPropagationTime <value> (default: 2) How many seconds it takes for proposals and attestations to travel across the p2p layer (one-way). Environment: $SEQ_ATTESTATION_PROPAGATION_TIME

  • --sequencer.checkpointProposalPrepareTime <value> (default: 1) Local time in seconds between the last block build finishing and the checkpoint proposal being ready for p2p send. Environment: $SEQ_CHECKPOINT_PROPOSAL_PREPARE_TIME

  • --sequencer.minBlockDuration <value> (default: 2) Minimum block-building time in seconds still worth allocating if the proposer starts late. Environment: $SEQ_MIN_BLOCK_DURATION

  • --sequencer.maxBlocksPerCheckpoint <value> (default: 24) Maximum number of blocks the sequencer packs into a single checkpoint, and the maximum indexWithinCheckpoint accepted on inbound block proposals. Environment: $MAX_BLOCKS_PER_CHECKPOINT

  • --sequencer.buildCheckpointIfEmpty <value> Have sequencer build and publish an empty checkpoint if there are no txs Environment: $SEQ_BUILD_CHECKPOINT_IF_EMPTY

  • --sequencer.minBlocksForCheckpoint <value> Minimum number of blocks required for a checkpoint proposal (test only)

  • --sequencer.skipPublishingCheckpointsPercent <value> Percent probability (0 - 100) of sequencer skipping checkpoint publishing (testing only) Environment: $SEQ_SKIP_CHECKPOINT_PUBLISH_PERCENT

  • --sequencer.skipBroadcastProposals <value> Skip broadcasting checkpoint and block proposals via gossipsub when proposer (for testing only)

  • --sequencer.skipBroadcastCheckpointProposal <value> Skip broadcasting only the CheckpointProposal via gossipsub when proposer; the held last block is broadcast standalone instead so peers still receive it as a proposed-but-uncheckpointed tip (for testing only)

  • --sequencer.pauseProposingForSlots <value> List of slots for which the sequencer will not produce a proposal (for testing only). Attestation paths are unaffected.

  • --sequencer.txPublicSetupAllowListExtend <value> Additional entries to extend the default setup allow list. Format: I:address

    :flags
    ,C:classId
    :flags
    . Flags: os (onlySelf), rn (rejectNullMsgSender), cl=N (calldataLength), joined with +. Environment: $TX_PUBLIC_SETUP_ALLOWLIST

  • --sequencer.keyStoreDirectory <value> Location of key store directory Environment: $KEY_STORE_DIRECTORY

  • --sequencer.sequencerPublisherPrivateKeys <value> The private keys to be used by the sequencer publisher. Environment: $SEQ_PUBLISHER_PRIVATE_KEYS

  • --sequencer.sequencerPublisherAddresses <value> The addresses of the publishers to use with remote signers Environment: $SEQ_PUBLISHER_ADDRESSES

  • --sequencer.blobAllowEmptySources <value> Whether to allow having no blob sources configured during startup Environment: $BLOB_ALLOW_EMPTY_SOURCES

  • --sequencer.blobFileStoreUrls <value> URLs for filestore blob archive, comma-separated. Tried in order until blobs are found. Environment: $BLOB_FILE_STORE_URLS

  • --sequencer.blobFileStoreUploadUrl <value> URL for uploading blobs to filestore (s3://, gs://, file://) Environment: $BLOB_FILE_STORE_UPLOAD_URL

  • --sequencer.blobHealthcheckUploadIntervalMinutes <value> Interval in minutes for uploading healthcheck file to file store (default: 60 = 1 hour) Environment: $BLOB_HEALTHCHECK_UPLOAD_INTERVAL_MINUTES

  • --sequencer.blobPreferFilestores <value> Whether to prefer filestores over consensus clients when fetching blobs. Default: false. Environment: $BLOB_PREFER_FILESTORES

  • --sequencer.blobFileStoreTimeoutMs <value> Timeout in ms for HTTP requests to the blob file store. Default: 10000 (10s). Environment: $BLOB_FILE_STORE_TIMEOUT_MS

  • --sequencer.archiveApiUrl <value> The URL of the archive API Environment: $BLOB_ARCHIVE_API_URL

  • --sequencer.sequencerPublisherAllowInvalidStates <value> (default: true) True to use publishers in invalid states (timed out, cancelled, etc) if no other is available Environment: $SEQ_PUBLISHER_ALLOW_INVALID_STATES

  • --sequencer.sequencerPublisherForwarderAddress <value> Address of the forwarder contract to wrap all L1 transactions through (for testing purposes only) Environment: $SEQ_PUBLISHER_FORWARDER_ADDRESS

  • --sequencer.l1TxFailedStore <value> Store for failed L1 transaction inputs (test networks only). Format: gs://bucket/path Environment: $L1_TX_FAILED_STORE

  • --sequencer.publisherFundingThreshold <value> Min ETH balance below which a publisher gets funded. Specified in ether (e.g. 0.1). Unset = funding disabled. Environment: $PUBLISHER_FUNDING_THRESHOLD

  • --sequencer.publisherFundingAmount <value> Amount of ETH to send when funding a publisher. Specified in ether (e.g. 0.5). Unset = funding disabled. Environment: $PUBLISHER_FUNDING_AMOUNT

PROVER NODE

  • --prover-node Starts Aztec Prover Node with options

  • --proverNode.keyStoreDirectory <value> Location of key store directory Environment: $KEY_STORE_DIRECTORY

  • --proverNode.acvmWorkingDirectory <value> The working directory to use for simulation/proving Environment: $ACVM_WORKING_DIRECTORY

  • --proverNode.acvmBinaryPath <value> The path to the ACVM binary Environment: $ACVM_BINARY_PATH

  • --proverNode.bbWorkingDirectory <value> The working directory to use for proving Environment: $BB_WORKING_DIRECTORY

  • --proverNode.bbBinaryPath <value> The path to the bb binary Environment: $BB_BINARY_PATH

  • --proverNode.bbSkipCleanup <value> Whether to skip cleanup of bb temporary files Environment: $BB_SKIP_CLEANUP

  • --proverNode.numConcurrentIVCVerifiers <value> (default: 8) Max concurrent verifications for the RPC verifier (QueuedIVCVerifier). Environment: $BB_NUM_IVC_VERIFIERS

  • --proverNode.bbIVCConcurrency <value> (default: 1) Thread count for the RPC IVC verifier. Environment: $BB_IVC_CONCURRENCY

  • --proverNode.bbChonkVerifyMaxBatch <value> (default: 16) Upper bound on proofs per batch for the peer chonk batch verifier. Proofs are verified immediately as they arrive; this only caps how many can accumulate while a batch is already being processed. Environment: $BB_CHONK_VERIFY_MAX_BATCH

  • --proverNode.bbChonkVerifyConcurrency <value> (default: 6) Thread count for the peer batch verifier parallel reduce. 0 = auto. Environment: $BB_CHONK_VERIFY_BATCH_CONCURRENCY

  • --proverNode.bbDebugOutputDir <value> When set, bb.js operations write input/output files and log equivalent CLI commands to this directory Environment: $BB_DEBUG_OUTPUT_DIR

  • --proverNode.nodeUrl <value> The URL to the Aztec node to take proving jobs from Environment: $AZTEC_NODE_URL

  • --proverNode.proverId <value> Hex value that identifies the prover. Defaults to the address used for submitting proofs if not set. Environment: $PROVER_ID

  • --proverNode.failedProofStore <value> Store for failed proof inputs. Google cloud storage is only supported at the moment. Set this value as gs://bucket-name/path/to/store. Environment: $PROVER_FAILED_PROOF_STORE

  • --proverNode.enqueueConcurrency <value> (default: 50) Max concurrent jobs the orchestrator serializes and enqueues to the broker. Environment: $PROVER_ENQUEUE_CONCURRENCY

  • --proverNode.blobSinkMapSizeKb <value> The maximum possible size of the blob sink DB in KB. Overwrites the general dataStoreMapSizeKb. Environment: $BLOB_SINK_MAP_SIZE_KB

  • --proverNode.blobAllowEmptySources <value> Whether to allow having no blob sources configured during startup Environment: $BLOB_ALLOW_EMPTY_SOURCES

  • --proverNode.blobFileStoreUrls <value> URLs for filestore blob archive, comma-separated. Tried in order until blobs are found. Environment: $BLOB_FILE_STORE_URLS

  • --proverNode.blobFileStoreUploadUrl <value> URL for uploading blobs to filestore (s3://, gs://, file://) Environment: $BLOB_FILE_STORE_UPLOAD_URL

  • --proverNode.blobHealthcheckUploadIntervalMinutes <value> Interval in minutes for uploading healthcheck file to file store (default: 60 = 1 hour) Environment: $BLOB_HEALTHCHECK_UPLOAD_INTERVAL_MINUTES

  • --proverNode.blobPreferFilestores <value> Whether to prefer filestores over consensus clients when fetching blobs. Default: false. Environment: $BLOB_PREFER_FILESTORES

  • --proverNode.blobFileStoreTimeoutMs <value> Timeout in ms for HTTP requests to the blob file store. Default: 10000 (10s). Environment: $BLOB_FILE_STORE_TIMEOUT_MS

  • --proverNode.archiveApiUrl <value> The URL of the archive API Environment: $BLOB_ARCHIVE_API_URL

  • --proverNode.proverPublisherAllowInvalidStates <value> (default: true) True to use publishers in invalid states (timed out, cancelled, etc) if no other is available Environment: $PROVER_PUBLISHER_ALLOW_INVALID_STATES

  • --proverNode.proverPublisherForwarderAddress <value> Address of the forwarder contract to wrap all L1 transactions through (for testing purposes only) Environment: $PROVER_PUBLISHER_FORWARDER_ADDRESS

  • --proverNode.publisherFundingThreshold <value> Min ETH balance below which a publisher gets funded. Specified in ether (e.g. 0.1). Unset = funding disabled. Environment: $PUBLISHER_FUNDING_THRESHOLD

  • --proverNode.publisherFundingAmount <value> Amount of ETH to send when funding a publisher. Specified in ether (e.g. 0.5). Unset = funding disabled. Environment: $PUBLISHER_FUNDING_AMOUNT

  • --proverNode.proverPublisherPrivateKeys <value> The private keys to be used by the prover publisher. Environment: $PROVER_PUBLISHER_PRIVATE_KEYS

  • --proverNode.proverPublisherAddresses <value> The addresses of the publishers to use with remote signers Environment: $PROVER_PUBLISHER_ADDRESSES

  • --proverNode.proverNodeMaxPendingJobs <value> (default: 10) The maximum number of pending jobs for the prover node Environment: $PROVER_NODE_MAX_PENDING_JOBS

  • --proverNode.proverNodePollingIntervalMs <value> (default: 1000) The interval in milliseconds to poll for new jobs Environment: $PROVER_NODE_POLLING_INTERVAL_MS

  • --proverNode.proverNodeMaxParallelBlocksPerEpoch <value> The Maximum number of blocks to process in parallel while proving an epoch Environment: $PROVER_NODE_MAX_PARALLEL_BLOCKS_PER_EPOCH

  • --proverNode.proverNodeFailedEpochStore <value> File store where to upload node state when an epoch fails to be proven Environment: $PROVER_NODE_FAILED_EPOCH_STORE

  • --proverNode.proverNodeEpochProvingDelayMs <value> Optional delay in milliseconds to wait for late-arriving events (e.g. reorgs) to settle before starting top-tree proving for an epoch

  • --proverNode.txGatheringIntervalMs <value> (default: 1000) How often to check that tx data is available Environment: $PROVER_NODE_TX_GATHERING_INTERVAL_MS

  • --proverNode.txGatheringBatchSize <value> (default: 10) How many transactions to gather from a node in a single request Environment: $PROVER_NODE_TX_GATHERING_BATCH_SIZE

  • --proverNode.txGatheringMaxParallelRequestsPerNode <value> (default: 100) How many tx requests to make in parallel to each node Environment: $PROVER_NODE_TX_GATHERING_MAX_PARALLEL_REQUESTS_PER_NODE

  • --proverNode.txGatheringTimeoutMs <value> (default: 120000) How long to wait for tx data to be available before giving up Environment: $PROVER_NODE_TX_GATHERING_TIMEOUT_MS

  • --proverNode.proverNodeDisableProofPublish <value> Whether the prover node skips publishing proofs to L1 Environment: $PROVER_NODE_DISABLE_PROOF_PUBLISH

  • --proverNode.web3SignerUrl <value> URL of the Web3Signer instance Environment: $WEB3_SIGNER_URL

PROVER BROKER

  • --prover-broker Starts Aztec proving job broker

  • --proverBroker.proverBrokerJobTimeoutMs <value> (default: 30000) Jobs are retried if not kept alive for this long Environment: $PROVER_BROKER_JOB_TIMEOUT_MS

  • --proverBroker.proverBrokerPollIntervalMs <value> (default: 1000) The interval to check job health status Environment: $PROVER_BROKER_POLL_INTERVAL_MS

  • --proverBroker.proverBrokerJobMaxRetries <value> (default: 3) If starting a prover broker locally, the max number of retries per proving job Environment: $PROVER_BROKER_JOB_MAX_RETRIES

  • --proverBroker.proverBrokerBatchSize <value> (default: 100) The prover broker writes jobs to disk in batches Environment: $PROVER_BROKER_BATCH_SIZE

  • --proverBroker.proverBrokerBatchIntervalMs <value> (default: 50) How often to flush batches to disk Environment: $PROVER_BROKER_BATCH_INTERVAL_MS

  • --proverBroker.proverBrokerMaxEpochsToKeepResultsFor <value> (default: 1) The maximum number of epochs to keep results for Environment: $PROVER_BROKER_MAX_EPOCHS_TO_KEEP_RESULTS_FOR

  • --proverBroker.proverBrokerStoreMapSizeKb <value> The size of the prover broker's database. Will override the dataStoreMapSizeKb if set. Environment: $PROVER_BROKER_STORE_MAP_SIZE_KB

  • --proverBroker.proverBrokerDebugReplayEnabled <value> Enable debug replay mode for replaying proving jobs from stored inputs Environment: $PROVER_BROKER_DEBUG_REPLAY_ENABLED

PROVER AGENT

  • --prover-agent Starts Aztec Prover Agent with options

  • --proverAgent.proverAgentCount <value> (default: 1) Whether this prover has a local prover agent Environment: $PROVER_AGENT_COUNT

  • --proverAgent.proverAgentPollIntervalMs <value> (default: 1000) The interval agents poll for jobs at Environment: $PROVER_AGENT_POLL_INTERVAL_MS

  • --proverAgent.proverAgentProofTypes <value> The types of proofs the prover agent can generate Environment: $PROVER_AGENT_PROOF_TYPES

  • --proverAgent.proverBrokerUrl <value> The URL where this agent takes jobs from Environment: $PROVER_BROKER_HOST

  • --proverAgent.realProofs <value> (default: true) Whether to construct real proofs Environment: $PROVER_REAL_PROOFS

  • --proverAgent.proverTestDelayType <value> (default: fixed) The type of artificial delay to introduce Environment: $PROVER_TEST_DELAY_TYPE

  • --proverAgent.proverTestDelayMs <value> Artificial delay to introduce to all operations to the test prover. Environment: $PROVER_TEST_DELAY_MS

  • --proverAgent.proverTestDelayFactor <value> (default: 1) If using realistic delays, what percentage of realistic times to apply. Environment: $PROVER_TEST_DELAY_FACTOR

  • --proverAgent.proverTestVerificationDelayMs <value> (default: 10) The delay (ms) to inject during fake proof verification Environment: $PROVER_TEST_VERIFICATION_DELAY_MS

  • --proverAgent.cancelJobsOnStop <value> Whether to abort pending proving jobs when the orchestrator is cancelled. When false (default), jobs remain in the broker queue and can be reused on restart/reorg. Environment: $PROVER_CANCEL_JOBS_ON_STOP

  • --proverAgent.proofStore <value> Optional proof input store for the prover Environment: $PROVER_PROOF_STORE

  • --p2p-enabled [value] Enable P2P subsystem Environment: $P2P_ENABLED

  • --p2p.validateMaxTxsPerBlock <value> Maximum transactions per block for validation. Overrides maxTxsPerBlock for gossip validation when set. Environment: $VALIDATOR_MAX_TX_PER_BLOCK

  • --p2p.validateMaxTxsPerCheckpoint <value> Maximum transactions per checkpoint for validation. Used as fallback for maxTxsPerBlock when that is not set. Environment: $VALIDATOR_MAX_TX_PER_CHECKPOINT

  • --p2p.p2pDiscoveryDisabled <value> A flag dictating whether the P2P discovery system should be disabled. Environment: $P2P_DISCOVERY_DISABLED

  • --p2p.blockCheckIntervalMS <value> (default: 100) The frequency in which to check for new L2 blocks. Environment: $P2P_BLOCK_CHECK_INTERVAL_MS

  • --p2p.debugDisableColocationPenalty <value> DEBUG: Disable colocation penalty - NEVER set to true in production Environment: $DEBUG_P2P_DISABLE_COLOCATION_PENALTY

  • --p2p.peerCheckIntervalMS <value> (default: 30000) The frequency in which to check for new peers. Environment: $P2P_PEER_CHECK_INTERVAL_MS

  • --p2p.peerFailedBanTimeMs <value> (default: 300000) How long to ban a peer after it fails maximum dial attempts. Environment: $P2P_PEER_FAILED_BAN_TIME_MS

  • --p2p.l2QueueSize <value> (default: 1000) Size of queue of L2 blocks to store. Environment: $P2P_L2_QUEUE_SIZE

  • --p2p.listenAddress <value> (default: 0.0.0.0) The listen address. ipv4 address. Environment: $P2P_LISTEN_ADDR

  • --p2p.p2pPort <value> (default: 40400) The port for the P2P service. Defaults to 40400 Environment: $P2P_PORT

  • --p2p.p2pBroadcastPort <value> The port to broadcast the P2P service on (included in the node's ENR). Defaults to P2P_PORT. Environment: $P2P_BROADCAST_PORT

  • --p2p.p2pIp <value> The IP address for the P2P service. ipv4 address. Environment: $P2P_IP

  • --p2p.peerIdPrivateKey <value> An optional peer id private key. If blank, will generate a random key. Environment: $PEER_ID_PRIVATE_KEY

  • --p2p.peerIdPrivateKeyPath <value> An optional path to store generated peer id private keys. If blank, will default to storing any generated keys in the root of the data directory. Environment: $PEER_ID_PRIVATE_KEY_PATH

  • --p2p.bootstrapNodes <value> A list of bootstrap peer ENRs to connect to. Separated by commas. Environment: $BOOTSTRAP_NODES

  • --p2p.bootstrapNodeEnrVersionCheck <value> Whether to check the version of the bootstrap node ENR. Environment: $P2P_BOOTSTRAP_NODE_ENR_VERSION_CHECK

  • --p2p.bootstrapNodesAsFullPeers <value> Whether to consider our configured bootnodes as full peers Environment: $P2P_BOOTSTRAP_NODES_AS_FULL_PEERS

  • --p2p.maxPeerCount <value> (default: 100) The maximum number of peers to connect to. Environment: $P2P_MAX_PEERS

  • --p2p.queryForIp <value> If announceUdpAddress or announceTcpAddress are not provided, query for the IP address of the machine. Default is false. Environment: $P2P_QUERY_FOR_IP

  • --p2p.publicIpServices <value> (default: https://api.ipify.org/,https://checkip.amazonaws.com/,https://ifconfig.me/ip,https://icanhazip.com/) Comma-separated HTTPS URLs that return plain-text public IPv4. Used when P2P_QUERY_FOR_IP is true and P2P_IP is unset. Tried in order until one succeeds. Environment: $P2P_PUBLIC_IP_SERVICES

  • --p2p.gossipsubInterval <value> (default: 700) The interval of the gossipsub heartbeat to perform maintenance tasks. Environment: $P2P_GOSSIPSUB_INTERVAL_MS

  • --p2p.gossipsubD <value> (default: 8) The D parameter for the gossipsub protocol. Environment: $P2P_GOSSIPSUB_D

  • --p2p.gossipsubDlo <value> (default: 4) The Dlo parameter for the gossipsub protocol. Environment: $P2P_GOSSIPSUB_DLO

  • --p2p.gossipsubDhi <value> (default: 12) The Dhi parameter for the gossipsub protocol. Environment: $P2P_GOSSIPSUB_DHI

  • --p2p.gossipsubDLazy <value> (default: 8) The Dlazy parameter for the gossipsub protocol. Environment: $P2P_GOSSIPSUB_DLAZY

  • --p2p.gossipsubFloodPublish <value> Whether to flood publish messages. - For testing purposes only Environment: $P2P_GOSSIPSUB_FLOOD_PUBLISH

  • --p2p.gossipsubMcacheLength <value> (default: 12) The number of gossipsub interval message cache windows to keep. Environment: $P2P_GOSSIPSUB_MCACHE_LENGTH

  • --p2p.gossipsubMcacheGossip <value> (default: 3) How many message cache windows to include when gossiping with other peers. Environment: $P2P_GOSSIPSUB_MCACHE_GOSSIP

  • --p2p.gossipsubSeenTTL <value> (default: 1200000) How long to keep message IDs in the seen cache. Environment: $P2P_GOSSIPSUB_SEEN_TTL

  • --p2p.maxGossipClockDisparityMs <value> (default: 500) Maximum clock-disparity tolerance (ms) applied to both ends of proposal/attestation gossip receive windows. Environment: $P2P_MAX_GOSSIP_CLOCK_DISPARITY_MS

  • --p2p.gossipsubTxTopicWeight <value> (default: 1) The weight of the tx topic for the gossipsub protocol. Environment: $P2P_GOSSIPSUB_TX_TOPIC_WEIGHT

  • --p2p.gossipsubTxInvalidMessageDeliveriesWeight <value> (default: -20) The weight of the tx invalid message deliveries for the gossipsub protocol. Environment: $P2P_GOSSIPSUB_TX_INVALID_MESSAGE_DELIVERIES_WEIGHT

  • --p2p.gossipsubTxInvalidMessageDeliveriesDecay <value> (default: 0.5) Determines how quickly the penalty for invalid message deliveries decays over time. Between 0 and 1. Environment: $P2P_GOSSIPSUB_TX_INVALID_MESSAGE_DELIVERIES_DECAY

  • --p2p.peerPenaltyValues <value> (default: 2,10,50) The values for the peer scoring system. Passed as a comma separated list of values in order: low, mid, high tolerance errors. Environment: $P2P_PEER_PENALTY_VALUES

  • --p2p.peerBanDurationSeconds <value> (default: 86400) How long (in seconds) a peer is banned for once its score drops below the ban threshold. Environment: $P2P_PEER_BAN_DURATION_SECONDS

  • --p2p.doubleSpendSeverePeerPenaltyWindow <value> (default: 30) The "age" (in L2 blocks) of a tx after which we heavily penalize a peer for sending it. Environment: $P2P_DOUBLE_SPEND_SEVERE_PEER_PENALTY_WINDOW

  • --p2p.blockRequestBatchSize <value> (default: 20) The number of blocks to fetch in a single batch. Environment: $P2P_BLOCK_REQUEST_BATCH_SIZE

  • --p2p.archivedTxLimit <value> The number of transactions that will be archived. If the limit is set to 0 then archiving will be disabled. Environment: $P2P_ARCHIVED_TX_LIMIT

  • --p2p.trustedPeers <value> A list of trusted peer ENRs that will always be persisted. Separated by commas. Environment: $P2P_TRUSTED_PEERS

  • --p2p.privatePeers <value> A list of private peer ENRs that will always be persisted and not be used for discovery. Separated by commas. Environment: $P2P_PRIVATE_PEERS

  • --p2p.preferredPeers <value> A list of preferred peer ENRs that will always be persisted and not be used for discovery. Separated by commas. Environment: $P2P_PREFERRED_PEERS

  • --p2p.p2pStoreMapSizeKb <value> The maximum possible size of the P2P DB in KB. Overwrites the general dataStoreMapSizeKb. Environment: $P2P_STORE_MAP_SIZE_KB

  • --p2p.txPublicSetupAllowListExtend <value> Additional entries to extend the default setup allow list. Format: I:address

    :flags
    ,C:classId
    :flags
    . Flags: os (onlySelf), rn (rejectNullMsgSender), cl=N (calldataLength), joined with +. Environment: $TX_PUBLIC_SETUP_ALLOWLIST

  • --p2p.maxPendingTxCount <value> (default: 1000) The maximum number of pending txs before evicting lower priority txs. Environment: $P2P_MAX_PENDING_TX_COUNT

  • --p2p.seenMessageCacheSize <value> (default: 100000) The number of messages to keep in the seen message cache Environment: $P2P_SEEN_MSG_CACHE_SIZE

  • --p2p.txValidationCacheSize <value> (default: 5000) Maximum number of items to keep in the tx validation LRU cache. Environment: $P2P_TX_VALIDATION_CACHE_SIZE

  • --p2p.p2pDisableStatusHandshake <value> True to disable the status handshake on peer connected. Environment: $P2P_DISABLE_STATUS_HANDSHAKE

  • --p2p.p2pAllowOnlyValidators <value> True to only permit validators to connect. Environment: $P2P_ALLOW_ONLY_VALIDATORS

  • --p2p.p2pMaxFailedAuthAttemptsAllowed <value> (default: 3) Number of auth attempts to allow before peer is banned. Number is inclusive Environment: $P2P_MAX_AUTH_FAILED_ATTEMPTS_ALLOWED

  • --p2p.dropTransactionsProbability <value> The probability that a transaction is discarded (0 - 1). - For testing purposes only Environment: $P2P_DROP_TX_CHANCE

  • --p2p.disableTransactions <value> Whether transactions are disabled for this node. This means transactions will be rejected at the RPC and P2P layers. Environment: $TRANSACTIONS_DISABLED

  • --p2p.txPoolDeleteTxsAfterReorg <value> Whether to delete transactions from the pool after a reorg instead of moving them back to pending. Environment: $P2P_TX_POOL_DELETE_TXS_AFTER_REORG

  • --p2p.debugP2PInstrumentMessages <value> Alters the format of p2p messages to include things like broadcast timestamp FOR TESTING ONLY Environment: $DEBUG_P2P_INSTRUMENT_MESSAGES

  • --p2p.broadcastEquivocatedProposals <value> Broadcast block proposals even when a conflicting proposal for the same slot already exists in the pool (for testing purposes only).

  • --p2p.skipIncomingProposals <value> Drop incoming block and checkpoint proposals at the libp2p dispatch layer (for testing only)

  • --p2p.skipProposalSlotValidation <value> Accept proposal gossip regardless of slot timing (for testing only)

  • --p2p.skipCheckpointProposalValidation <value> Skip checkpoint proposal validation and always attest, broadcasting the attestation before processing the embedded last block

  • --p2p.minTxPoolAgeMs <value> (default: 2000) Minimum age (ms) a transaction must have been in the pool before it is eligible for block building. Environment: $P2P_MIN_TX_POOL_AGE_MS

  • --p2p.slashDataWithholdingToleranceSlots <value> (default: 3) L2 slots to wait after a checkpoint slot before declaring its txs missing. Drives both the data-withholding slasher check and the missing-tx collection deadline. Environment: $SLASH_DATA_WITHHOLDING_TOLERANCE_SLOTS

  • --p2p.p2pMissingTxCollectionDeadlineSlots <value> Optional deadline (in L2 slots after the block slot) for collecting missing txs for unproven mined blocks. Clamped up to the data-withholding tolerance window so collection never Environment: $P2P_MISSING_TX_COLLECTION_DEADLINE_SLOTS

aztec test​

No help information available for this command.

aztec trigger-seed-snapshot​

Triggers a seed snapshot for the next epoch.

Usage:

aztec trigger-seed-snapshot [options]

Options:

  • -pk, --private-key <string> - The private key to use for deployment
  • -m, --mnemonic <string> - The mnemonic to use in deployment (default: "test test test test test test test test test test test junk")
  • --rollup <address> - ethereum address of the rollup contract
  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -h, --help - display help for command

aztec update​

Updates Nodejs and Noir dependencies

Usage:

aztec update [options] [projectPath]

Options:

  • --contract [paths...] - Paths to contracts to update dependencies (default: [])
  • --aztec-version <semver> - The version to update Aztec packages to. Defaults to latest (default: "latest")
  • -h, --help - display help for command

aztec validator-keys|valKeys​

This subcommand does not provide its own help information.

aztec vote-on-governance-proposal​

Votes on a governance proposal.

Usage:

aztec vote-on-governance-proposal [options]

Options:

  • -p, --proposal-id <string> - The ID of the proposal
  • -a, --vote-amount <string> - The amount of tokens to vote
  • --in-favor <boolean> - Whether to vote in favor of the proposal. Use "yea" for true, any other value for false.
  • --wait <boolean> - Whether to wait until the proposal is active
  • -r, --registry-address <string> - The address of the registry contract
  • --l1-rpc-urls <string> - List of Ethereum host URLs. Chain identifiers localhost and testnet can be used (comma separated) (default: ["http://localhost:8545"], env: ETHEREUM_HOSTS)
  • -c, --l1-chain-id <number> - Chain ID of the ethereum host (default: 31337, env: L1_CHAIN_ID)
  • -pk, --private-key <string> - The private key to use to vote
  • -m, --mnemonic <string> - The mnemonic to use to vote (default: "test test test test test test test test test test test junk")
  • -i, --mnemonic-index <number> - The index of the mnemonic to use to vote (default: 0)
  • -h, --help - display help for command