Skip to main content
Version: alpha-testnet

CLI Reference

warning

aztec-builder and aztec-sandbox have been deprecated in favor of aztec CLI

Starting and testing​

start​

Initiates various Aztec modules. It can be used to start individual components or the entire Aztec Sandbox.

aztec start [options]

Options:

  • -sb, --sandbox: Starts the Aztec Sandbox.
  • -p, --port <port>: Specifies the port to run Aztec on (default: 8080).
  • -n, --node [options]: Starts the Aztec Node with specified options.
  • -px, --pxe [options]: Starts the PXE (Private eXecution Environment) with specified options.
  • -a, --archiver [options]: Starts the Archiver with specified options.
  • -s, --sequencer [options]: Starts the Sequencer with specified options.
  • -r, --prover [options]: Starts the Prover Agent with specified options.
  • -o, --prover-node [options]: Starts the Prover Node with specified options.
  • -p2p, --p2p-bootstrap [options]: Starts the P2P Bootstrap node with specified options.
  • -t, --txe [options]: Starts the TXE (Transaction Execution Environment) with specified options.

test​

Runs tests written in contracts.

aztec test [options]

Options:

  • --workdir <path>: Sets the working directory inside the container (default: current directory).
  • -e, --env <key=value>: Set environment variables (can be used multiple times).
  • --no-tty: Run the container without a TTY.
  • --rm: Automatically remove the container when it exits.
  • -i, --interactive: Keep STDIN open even if not attached.
  • -t, --tty: Allocate a pseudo-TTY.

Account Management​

create-account​

Creates an Aztec account for sending transactions.

aztec create-account [options]

Options:

  • --skip-initialization: Skip initializing the account contract.
  • --public-deploy: Publicly deploys the account and registers the class if needed.
  • --private-key <key>: Private key for the account (uses random by default).
  • --register-only: Just register the account on the PXE without deploying.
  • --no-wait: Skip waiting for the contract deployment.

get-accounts​

Retrieves all Aztec accounts stored in the PXE.

aztec get-accounts [options]

Options:

  • --json: Emit output as JSON.

get-account​

Retrieves an account given its Aztec address.

aztec get-account <address> [options]

register-recipient​

Registers a recipient in the PXE.

aztec register-recipient [options]

Required options:

  • -a, --address <aztecAddress>: The account's Aztec address.
  • -p, --public-key <publicKey>: The account public key.
  • -pa, --partial-address <partialAddress>: The partially computed address of the account contract.

Contract Deployment and Interaction​

deploy​

Deploys a compiled Aztec.nr contract to Aztec.

aztec deploy <artifact> [options]

Options:

  • --init <string>: The contract initializer function to call (default: "constructor").
  • --no-init: Leave the contract uninitialized.
  • -a, --args <constructorArgs...>: Contract constructor arguments.
  • -k, --public-key <string>: Optional encryption public key for this address.
  • -s, --salt <hex string>: Optional deployment salt for generating the deployment address.
  • --universal: Do not mix the sender address into the deployment.
  • --json: Emit output as JSON.
  • --no-wait: Skip waiting for the contract deployment.
  • --no-class-registration: Don't register this contract class.
  • --no-public-deployment: Don't emit this contract's public bytecode.

send​

Calls a function on an Aztec contract.

aztec send <functionName> [options]

Options:

  • -a, --args [functionArgs...]: Function arguments.
  • -c, --contract-artifact <fileLocation>: Compiled Aztec.nr contract's ABI.
  • -ca, --contract-address <address>: Aztec address of the contract.
  • --no-wait: Print transaction hash without waiting for it to be mined.

call​

Simulates the execution of a view (read-only) function on a deployed contract.

aztec call <functionName> [options]

Options:

  • -a, --args [functionArgs...]: Function arguments.
  • -c, --contract-artifact <fileLocation>: Compiled Aztec.nr contract's ABI.
  • -ca, --contract-address <address>: Aztec address of the contract.
  • -f, --from <string>: Aztec address of the caller.

add-contract​

Adds an existing contract to the PXE.

aztec add-contract [options]

Required options:

  • -c, --contract-artifact <fileLocation>: Compiled Aztec.nr contract's ABI.
  • -ca, --contract-address <address>: Aztec address of the contract.
  • --init-hash <init hash>: Initialization hash.

Optional:

  • --salt <salt>: Optional deployment salt.
  • -p, --public-key <public key>: Optional public key for this contract.
  • --portal-address <address>: Optional address to a portal contract on L1.
  • --deployer-address <address>: Optional address of the contract deployer.

Network and Node Information​

get-node-info​

Retrieves information about an Aztec node at a URL.

aztec get-node-info [options]

get-pxe-info​

Retrieves information about a PXE at a URL.

aztec get-pxe-info [options]

block-number​

Retrieves the current Aztec L2 block number.

aztec block-number [options]

Transaction and Block Querying​

get-tx​

Retrieves the receipt for a specified transaction hash.

aztec get-tx <txHash> [options]

get-block​

Retrieves information for a given block or the latest block.

aztec get-block [blockNumber] [options]

Options:

  • -f, --follow: Keep polling for new blocks.

Logging and Data Retrieval​

get-logs​

Retrieves unencrypted logs based on filter parameters.

aztec get-logs [options]

Options:

  • -tx, --tx-hash <txHash>: Transaction hash to get the receipt for.
  • -fb, --from-block <blockNum>: Initial block number for getting logs.
  • -tb, --to-block <blockNum>: Up to which block to fetch logs.
  • -al --after-log <logId>: ID of a log after which to fetch the logs.
  • -ca, --contract-address <address>: Contract address to filter logs by.
  • --follow: Keep polling for new logs until interrupted.

Development and Debugging Tools​

flamegraph​

Generates a flamegraph of the gate counts of a private function call.

[SERVE=1] aztec flamegraph <artifact_path> <function_name>

codegen​

Validates and generates an Aztec Contract ABI from Noir ABI.

aztec codegen <noir-abi-path> [options]

Options:

  • -o, --outdir <path>: Output folder for the generated code.
  • --force: Force code generation even when the contract has not changed.

update​

Updates Nodejs and Noir dependencies.

aztec update [projectPath] [options]

Options:

  • --contract [paths...]: Paths to contracts to update dependencies.
  • --aztec-version <semver>: The version to update Aztec packages to (default: latest).

inspect-contract​

Shows a list of external callable functions for a contract.

aztec inspect-contract <contractArtifactFile>

parse-parameter-struct​

Helper for parsing an encoded string into a contract's parameter struct.

aztec parse-parameter-struct <encodedString> [options]

Required options:

  • -c, --contract-artifact <fileLocation>: Compiled Aztec.nr contract's ABI.
  • -p, --parameter <parameterName>: The name of the struct parameter to decode into.

L1 Contract Management​

deploy-l1-contracts​

Deploys all necessary Ethereum contracts for Aztec.

aztec deploy-l1-contracts [options]

Required options:

  • -u, --rpc-urls <string>: List of URLs of Ethereum nodes (comma separated).
  • -pk, --private-key <string>: The private key to use for deployment.

deploy-l1-verifier​

Deploys the rollup verifier contract.

aztec deploy-l1-verifier [options]

Required options:

  • --eth-rpc-urls <string>: List of URLs of Ethereum nodes (comma separated).
  • -pk, --private-key <string>: The private key to use for deployment.
  • --verifier <verifier>: Either 'mock' or 'real'.

bridge-fee-juice​

Bridges (and optionally mints) L1 Fee Juice and pushes them to L2.

aztec bridge-fee-juice <amount> <recipient> [options]

Required option:

  • --l1-rpc-urls <string>: List of URLs of Ethereum nodes (comma separated).

get-l1-balance​

Gets the balance of ETH or an ERC20 token on L1 for a given Ethereum address.

aztec get-l1-balance <who> [options]

Required option:

  • --l1-rpc-urls <string>: List of URLs of Ethereum nodes (comma separated).

Utility Commands​

generate-keys​

Generates encryption and signing private keys.

aztec generate-keys [options]

Option:

  • -m, --mnemonic: Optional mnemonic string for private key generation.

generate-p2p-private-key​

Generates a LibP2P peer private key.

aztec generate-p2p-private-key

example-contracts​

Lists the example contracts available to deploy from @aztec/noir-contracts.js.

aztec example-contracts

compute-selector​

Computes a selector for a given function signature.

aztec compute-selector <functionSignature>

bootstrap​

Bootstraps the blockchain.

aztec bootstrap [options]

sequencers​

Manages or queries registered sequencers on the L1 rollup contract.

aztec sequencers <command> [who] [options]

Commands: list, add, remove, who-next

Required option:

  • --l1-rpc-urls <string>: List of URLs of Ethereum nodes (comma separated).

Note: Most commands accept a --rpc-url option to specify the Aztec node URL, and many accept fee-related options for gas limit and price configuration.