Cli Reference
note
The environment variable name corresponding to each flag is shown as $ENV_VAR on the right hand side.
If two subsystems can contain the same configuration option, only one needs to be provided. e.g. --archiver.blobSinkUrl and --sequencer.blobSinkUrl point to the same value if the node is started with both the --archiver and --sequencer options.
NETWORK
--network <value> ($NETWORK)
Network to run Aztec on
API
--port <value> (default: 8080) ($AZTEC_PORT)
Port to run the Aztec Services on
--admin-port <value> (default: 8880) ($AZTEC_ADMIN_PORT)
Port to run admin APIs of Aztec Services on on
--api-prefix <value> ($API_PREFIX)
Prefix for API routes on any service that is started
ETHEREUM
--l1-rpc-urls <value> (default: http://localhost:8545) ($ETHEREUM_HOSTS)
List of URLs of the Ethereum RPC nodes that services will connect to (comma separated)
--l1-chain-id <value> (default: 31337) ($L1_CHAIN_ID)
The L1 chain ID
--l1-mnemonic <value> (default: test test test test test test test test test test test junk)($MNEMONIC)
Mnemonic for L1 accounts. Will be used if no publisher private keys are provided
--l1-consensus-host-urls <value> (default: ) ($L1_CONSENSUS_HOST_URLS)
List of URLs of the Ethereum consensus nodes that services will connect to (comma separated)
--l1-consensus-host-api-keys <value> (default: ) ($L1_CONSENSUS_HOST_API_KEYS)
List of API keys for the corresponding Ethereum consensus nodes
--l1-consensus-host-api-key-headers <value> (default: ) ($L1_CONSENSUS_HOST_API_KEY_HEADERS)
List of API key headers for the corresponding Ethereum consensus nodes. If not set, the api key for the corresponding node will be appended to the URL as ?key=<api-key>
STORAGE
--data-directory <value> ($DATA_DIRECTORY)
Where to store data for services. If not set, will store temporarily
--data-store-map-size-kb <value> ($DATA_STORE_MAP_SIZE_KB)
The maximum possible size of the data store DB in KB. Can be overridden by component-specific options.
L1 CONTRACT ADDRESSES
--rollup-address <value> ($ROLLUP_CONTRACT_ADDRESS)
The deployed L1 rollup contract address
--registry-address <value> ($REGISTRY_CONTRACT_ADDRESS)
The deployed L1 registry contract address
--inbox-address <value> ($INBOX_CONTRACT_ADDRESS)
The deployed L1 -> L2 inbox contract address
--outbox-address <value> ($OUTBOX_CONTRACT_ADDRESS)
The deployed L2 -> L1 outbox contract address
--fee-juice-address <value> ($FEE_JUICE_CONTRACT_ADDRESS)
The deployed L1 Fee Juice contract address
--staking-asset-address <value> ($STAKING_ASSET_CONTRACT_ADDRESS)
The deployed L1 Staking Asset contract address
--fee-juice-portal-address <value> ($FEE_JUICE_PORTAL_CONTRACT_ADDRESS)
The deployed L1 Fee Juice portal contract address
AZTEC NODE
--node
Starts Aztec Node with options
--node.archiverUrl <value> ($ARCHIVER_URL)
URL for an archiver service
--node.deployAztecContracts ($DEPLOY_AZTEC_CONTRACTS)
Deploys L1 Aztec contracts before starting the node. Needs mnemonic or private key to be set.
--node.deployAztecContractsSalt <value> ($DEPLOY_AZTEC_CONTRACTS_SALT)
Numeric salt for deploying L1 Aztec contracts before starting the node. Needs mnemonic or private key to be set. Implies --node.deployAztecContracts.
--node.assumeProvenThroughBlockNumber <value> ($ASSUME_PROVEN_THROUGH_BLOCK_NUMBER)
Cheats the rollup contract into assuming every block until this one is proven. Useful for speeding up bootstraps.
--node.publisherPrivateKey <value> ($L1_PRIVATE_KEY)
Private key of account for publishing L1 contracts
--node.worldStateBlockCheckIntervalMS <value> (default: 100) ($WS_BLOCK_CHECK_INTERVAL_MS)
Frequency in which to check for blocks in ms
--node.syncMode <value> (default: snapshot) ($SYNC_MODE)
Set sync mode to `full` to always sync via L1, `snapshot` to download a snapshot if there is no local data, `force-snapshot` to download even if there is local data.
--node.snapshotsUrl <value> ($SYNC_SNAPSHOTS_URL)
Base URL for downloading snapshots for snapshot sync.
P2P SUBSYSTEM
--p2p-enabled [value] ($P2P_ENABLED)
Enable P2P subsystem
--p2p.blockCheckIntervalMS <value> (default: 100) ($P2P_BLOCK_CHECK_INTERVAL_MS)
The frequency in which to check for new L2 blocks.
--p2p.debugDisableColocationPenalty <value> ($DEBUG_P2P_DISABLE_COLOCATION_PENALTY)
DEBUG: Disable colocation penalty - NEVER set to true in production
--p2p.peerCheckIntervalMS <value> (default: 30000) ($P2P_PEER_CHECK_INTERVAL_MS)
The frequency in which to check for new peers.
--p2p.l2QueueSize <value> (default: 1000) ($P2P_L2_QUEUE_SIZE)
Size of queue of L2 blocks to store.
--p2p.listenAddress <value> (default: 0.0.0.0) ($P2P_LISTEN_ADDR)
The listen address. ipv4 address.
--p2p.p2pPort <value> (default: 40400) ($P2P_PORT)
The port for the P2P service.
--p2p.p2pIp <value> ($P2P_IP)
The IP address for the P2P service. ipv4 address.
--p2p.peerIdPrivateKey <value> ($PEER_ID_PRIVATE_KEY)
An optional peer id private key. If blank, will generate a random key.
--p2p.bootstrapNodes <value> (default: ) ($BOOTSTRAP_NODES)
A list of bootstrap peer ENRs to connect to. Separated by commas.
--p2p.bootstrapNodeEnrVersionCheck <value> ($P2P_BOOTSTRAP_NODE_ENR_VERSION_CHECK)
Whether to check the version of the bootstrap node ENR.
--p2p.bootstrapNodesAsFullPeers <value> ($P2P_BOOTSTRAP_NODES_AS_FULL_PEERS)
Whether to consider our configured bootnodes as full peers
--p2p.maxPeerCount <value> (default: 100) ($P2P_MAX_PEERS)
The maximum number of peers to connect to.
--p2p.queryForIp <value> ($P2P_QUERY_FOR_IP)
If announceUdpAddress or announceTcpAddress are not provided, query for the IP address of the machine. Default is false.
--p2p.keepProvenTxsInPoolFor <value> ($P2P_TX_POOL_KEEP_PROVEN_FOR)
How many blocks have to pass after a block is proven before its txs are deleted (zero to delete immediately once proven)
--p2p.keepAttestationsInPoolFor <value> (default: 96) ($P2P_ATTESTATION_POOL_KEEP_FOR)
How many slots to keep attestations for.
--p2p.gossipsubInterval <value> (default: 700) ($P2P_GOSSIPSUB_INTERVAL_MS)
The interval of the gossipsub heartbeat to perform maintenance tasks.
--p2p.gossipsubD <value> (default: 8) ($P2P_GOSSIPSUB_D)
The D parameter for the gossipsub protocol.
--p2p.gossipsubDlo <value> (default: 4) ($P2P_GOSSIPSUB_DLO)
The Dlo parameter for the gossipsub protocol.
--p2p.gossipsubDhi <value> (default: 12) ($P2P_GOSSIPSUB_DHI)
The Dhi parameter for the gossipsub protocol.
--p2p.gossipsubDLazy <value> (default: 8) ($P2P_GOSSIPSUB_DLAZY)
The Dlazy parameter for the gossipsub protocol.
--p2p.gossipsubFloodPublish <value> (default: true) ($P2P_GOSSIPSUB_FLOOD_PUBLISH)
Whether to flood publish messages. - For testing purposes only
--p2p.gossipsubMcacheLength <value> (default: 6) ($P2P_GOSSIPSUB_MCACHE_LENGTH)
The number of gossipsub interval message cache windows to keep.
--p2p.gossipsubMcacheGossip <value> (default: 3) ($P2P_GOSSIPSUB_MCACHE_GOSSIP)
How many message cache windows to include when gossiping with other pears.
--p2p.gossipsubTxTopicWeight <value> (default: 1) ($P2P_GOSSIPSUB_TX_TOPIC_WEIGHT)
The weight of the tx topic for the gossipsub protocol.
--p2p.gossipsubTxInvalidMessageDeliveriesWeight <value> (default: -20) ($P2P_GOSSIPSUB_TX_INVALID_MESSAGE_DELIVERIES_WEIGHT)
The weight of the tx invalid message deliveries for the gossipsub protocol.
--p2p.gossipsubTxInvalidMessageDeliveriesDecay <value> (default: 0.5) ($P2P_GOSSIPSUB_TX_INVALID_MESSAGE_DELIVERIES_DECAY)
Determines how quickly the penalty for invalid message deliveries decays over time. Between 0 and 1.
--p2p.peerPenaltyValues <value> (default: 2,10,50) ($P2P_PEER_PENALTY_VALUES)
The values for the peer scoring system. Passed as a comma separated list of values in order: low, mid, high tolerance errors.
--p2p.doubleSpendSeverePeerPenaltyWindow <value> (default: 30) ($P2P_DOUBLE_SPEND_SEVERE_PEER_PENALTY_WINDOW)
The "age" (in L2 blocks) of a tx after which we heavily penalize a peer for sending it.
--p2p.blockRequestBatchSize <value> (default: 20) ($P2P_BLOCK_REQUEST_BATCH_SIZE)
The number of blocks to fetch in a single batch.
--p2p.archivedTxLimit <value> ($P2P_ARCHIVED_TX_LIMIT)
The number of transactions that will be archived. If the limit is set to 0 then archiving will be disabled.
--p2p.trustedPeers <value> (default: ) ($P2P_TRUSTED_PEERS)
A list of trusted peers ENRs. Separated by commas.
--p2p.p2pStoreMapSizeKb <value> ($P2P_STORE_MAP_SIZE_KB)
The maximum possible size of the P2P DB in KB. Overwrites the general dataStoreMapSizeKB.
--p2p.txPublicSetupAllowList <value> ($TX_PUBLIC_SETUP_ALLOWLIST)
The list of functions calls allowed to run in setup
--p2p.maxTxPoolSize <value> (default: 100000000) ($P2P_MAX_TX_POOL_SIZE)
The maximum cumulative tx size of pending txs (in bytes) before evicting lower priority txs.
--p2p.overallRequestTimeoutMs <value> (default: 4000) ($P2P_REQRESP_OVERALL_REQUEST_TIMEOUT_MS)
The overall timeout for a request response operation.
--p2p.individualRequestTimeoutMs <value> (default: 2000) ($P2P_REQRESP_INDIVIDUAL_REQUEST_TIMEOUT_MS)
The timeout for an individual request response peer interaction.
--p2p.rollupVersion <value> ($ROLLUP_VERSION)
The version of the rollup.
TELEMETRY
--tel.metricsCollectorUrl <value> ($OTEL_EXPORTER_OTLP_METRICS_ENDPOINT)
The URL of the telemetry collector for metrics
--tel.tracesCollectorUrl <value> ($OTEL_EXPORTER_OTLP_TRACES_ENDPOINT)
The URL of the telemetry collector for traces
--tel.logsCollectorUrl <value> ($OTEL_EXPORTER_OTLP_LOGS_ENDPOINT)
The URL of the telemetry collector for logs
--tel.otelCollectIntervalMs <value> (default: 60000) ($OTEL_COLLECT_INTERVAL_MS)
The interval at which to collect metrics
--tel.otelExportTimeoutMs <value> (default: 30000) ($OTEL_EXPORT_TIMEOUT_MS)
The timeout for exporting metrics
--tel.otelExcludeMetrics <value> (default: ) ($OTEL_EXCLUDE_METRICS)
A list of metric prefixes to exclude from export
PXE
--pxe
Starts Aztec PXE with options
--pxe.dataStoreMapSizeKB <value> (default: 134217728) ($DATA_STORE_MAP_SIZE_KB)
DB mapping size to be applied to all key/value stores
--pxe.rollupVersion <value> ($ROLLUP_VERSION)
The version of the rollup.
--pxe.l2StartingBlock <value> (default: 1) ($PXE_L2_STARTING_BLOCK)
L2 block to start scanning from for new accounts
--pxe.l2BlockBatchSize <value> (default: 200) ($PXE_L2_BLOCK_BATCH_SIZE)
Maximum amount of blocks to pull from the stream in one request when synchronizing
--pxe.bbBinaryPath <value> ($BB_BINARY_PATH)
Path to the BB binary
--pxe.bbWorkingDirectory <value> ($BB_WORKING_DIRECTORY)
Working directory for the BB binary
--pxe.bbSkipCleanup <value> ($BB_SKIP_CLEANUP)
True to skip cleanup of temporary files for debugging purposes
--pxe.proverEnabled <value> (default: true) ($PXE_PROVER_ENABLED)
Enable real proofs
--pxe.network <value> ($NETWORK)
External Aztec network to connect to. e.g. devnet
--pxe.apiKey <value> ($API_KEY)
API Key required by the external network's node
--pxe.nodeUrl <value> ($AZTEC_NODE_URL)
Custom Aztec Node URL to connect to
ARCHIVER
--archiver
Starts Aztec Archiver with options
--archiver.blobSinkUrl <value> ($BLOB_SINK_URL)
The URL of the blob sink
--archiver.archiveApiUrl <value> ($BLOB_SINK_ARCHIVE_API_URL)
The URL of the archive API
--archiver.archiverPollingIntervalMS <value> (default: 500) ($ARCHIVER_POLLING_INTERVAL_MS)
The polling interval in ms for retrieving new L2 blocks and encrypted logs.
--archiver.archiverBatchSize <value> (default: 100) ($ARCHIVER_BATCH_SIZE)
The number of L2 blocks the archiver will attempt to download at a time.
--archiver.maxLogs <value> (default: 1000) ($ARCHIVER_MAX_LOGS)
The max number of logs that can be obtained in 1 "getPublicLogs" call.
--archiver.archiverStoreMapSizeKb <value> ($ARCHIVER_STORE_MAP_SIZE_KB)
The maximum possible size of the archiver DB in KB. Overwrites the general dataStoreMapSizeKB.
--archiver.rollupVersion <value> ($ROLLUP_VERSION)
The version of the rollup.
--archiver.viemPollingIntervalMS <value> (default: 1000) ($ARCHIVER_VIEM_POLLING_INTERVAL_MS)
The polling interval viem uses in ms
--archiver.ethereumSlotDuration <value> (default: 12) ($ETHEREUM_SLOT_DURATION)
How many seconds an L1 slot lasts.
--archiver.aztecSlotDuration <value> (default: 24) ($AZTEC_SLOT_DURATION)
How many seconds an L2 slots lasts (must be multiple of ethereum slot duration).
--archiver.aztecEpochDuration <value> (default: 16) ($AZTEC_EPOCH_DURATION)
How many L2 slots an epoch lasts (maximum AZTEC_MAX_EPOCH_DURATION).
--archiver.aztecTargetCommitteeSize <value> (default: 48) ($AZTEC_TARGET_COMMITTEE_SIZE)
The target validator committee size.
--archiver.aztecProofSubmissionWindow <value> (default: 31) ($AZTEC_PROOF_SUBMISSION_WINDOW)
The number of L2 slots that a proof for an epoch can be submitted in, starting from the beginning of the epoch.
--archiver.minimumStake <value> (default: 100000000000000000000) ($AZTEC_MINIMUM_STAKE)
The minimum stake for a validator.
--archiver.slashingQuorum <value> (default: 6) ($AZTEC_SLASHING_QUORUM)
The slashing quorum
--archiver.slashingRoundSize <value> (default: 10) ($AZTEC_SLASHING_ROUND_SIZE)
The slashing round size
--archiver.governanceProposerQuorum <value> (default: 51) ($AZTEC_GOVERNANCE_PROPOSER_QUORUM)
The governance proposing quorum
--archiver.governanceProposerRoundSize <value> (default: 100) ($AZTEC_GOVERNANCE_PROPOSER_ROUND_SIZE)
The governance proposing round size
--archiver.manaTarget <value> (default: 10000000000) ($AZTEC_MANA_TARGET)
The mana target for the rollup
--archiver.provingCostPerMana <value> (default: 100) ($AZTEC_PROVING_COST_PER_MANA)
The proving cost per mana
--archiver.gasLimitBufferPercentage <value> (default: 20) ($L1_GAS_LIMIT_BUFFER_PERCENTAGE)
How much to increase calculated gas limit by (percentage)
--archiver.maxGwei <value> (default: 500) ($L1_GAS_PRICE_MAX)
Maximum gas price in gwei
--archiver.maxBlobGwei <value> (default: 1500) ($L1_BLOB_FEE_PER_GAS_MAX)
Maximum blob fee per gas in gwei
--archiver.priorityFeeBumpPercentage <value> (default: 20) ($L1_PRIORITY_FEE_BUMP_PERCENTAGE)
How much to increase priority fee by each attempt (percentage)
--archiver.priorityFeeRetryBumpPercentage <value> (default: 50) ($L1_PRIORITY_FEE_RETRY_BUMP_PERCENTAGE)
How much to increase priority fee by each retry attempt (percentage)
--archiver.fixedPriorityFeePerGas <value> ($L1_FIXED_PRIORITY_FEE_PER_GAS)
Fixed priority fee per gas in Gwei. Overrides any priority fee bump percentage
--archiver.maxAttempts <value> (default: 3) ($L1_TX_MONITOR_MAX_ATTEMPTS)
Maximum number of speed-up attempts
--archiver.checkIntervalMs <value> (default: 1000) ($L1_TX_MONITOR_CHECK_INTERVAL_MS)
How often to check tx status
--archiver.stallTimeMs <value> (default: 45000) ($L1_TX_MONITOR_STALL_TIME_MS)
How long before considering tx stalled
--archiver.txTimeoutMs <value> (default: 300000) ($L1_TX_MONITOR_TX_TIMEOUT_MS)
How long to wait for a tx to be mined before giving up. Set to 0 to disable.
--archiver.txPropagationMaxQueryAttempts <value> (default: 3) ($L1_TX_PROPAGATION_MAX_QUERY_ATTEMPTS)
How many attempts will be done to get a tx after it was sent
SEQUENCER
--sequencer
Starts Aztec Sequencer with options
--sequencer.validatorPrivateKey <value> ($VALIDATOR_PRIVATE_KEY)
The private key of the validator participating in attestation duties
--sequencer.disableValidator <value> ($VALIDATOR_DISABLED)
Do not run the validator
--sequencer.attestationPollingIntervalMs <value> (default: 200) ($VALIDATOR_ATTESTATIONS_POLLING_INTERVAL_MS)
Interval between polling for new attestations
--sequencer.validatorReexecute <value> (default: true) ($VALIDATOR_REEXECUTE)
Re-execute transactions before attesting
--sequencer.transactionPollingIntervalMS <value> (default: 500) ($SEQ_TX_POLLING_INTERVAL_MS)
The number of ms to wait between polling for pending txs.
--sequencer.maxTxsPerBlock <value> (default: 32) ($SEQ_MAX_TX_PER_BLOCK)
The maximum number of txs to include in a block.
--sequencer.minTxsPerBlock <value> (default: 1) ($SEQ_MIN_TX_PER_BLOCK)
The minimum number of txs to include in a block.
--sequencer.maxL2BlockGas <value> (default: 10000000000) ($SEQ_MAX_L2_BLOCK_GAS)
The maximum L2 block gas.
--sequencer.maxDABlockGas <value> (default: 10000000000) ($SEQ_MAX_DA_BLOCK_GAS)
The maximum DA block gas.
--sequencer.coinbase <value> ($COINBASE)
Recipient of block reward.
--sequencer.feeRecipient <value> ($FEE_RECIPIENT)
Address to receive fees.
--sequencer.acvmWorkingDirectory <value> ($ACVM_WORKING_DIRECTORY)
The working directory to use for simulation/proving
--sequencer.acvmBinaryPath <value> ($ACVM_BINARY_PATH)
The path to the ACVM binary
--sequencer.maxBlockSizeInBytes <value> (default: 1048576) ($SEQ_MAX_BLOCK_SIZE_IN_BYTES)
Max block size
--sequencer.enforceTimeTable <value> (default: true) ($SEQ_ENFORCE_TIME_TABLE)
Whether to enforce the time table when building blocks
--sequencer.governanceProposerPayload <value> (default: 0x0000000000000000000000000000000000000000) ($GOVERNANCE_PROPOSER_PAYLOAD_ADDRESS)
The address of the payload for the governanceProposer
--sequencer.maxL1TxInclusionTimeIntoSlot <value> ($SEQ_MAX_L1_TX_INCLUSION_TIME_INTO_SLOT)
How many seconds into an L1 slot we can still send a tx and get it mined.
--sequencer.txPublicSetupAllowList <value> ($TX_PUBLIC_SETUP_ALLOWLIST)
The list of functions calls allowed to run in setup
--sequencer.viemPollingIntervalMS <value> (default: 1000) ($L1_READER_VIEM_POLLING_INTERVAL_MS)
The polling interval viem uses in ms
--sequencer.customForwarderContractAddress <value> (default: 0x0000000000000000000000000000000000000000) ($CUSTOM_FORWARDER_CONTRACT_ADDRESS)
The address of the custom forwarder contract.
--sequencer.publisherPrivateKey <value> (default: 0x0000000000000000000000000000000000000000000000000000000000000000)($SEQ_PUBLISHER_PRIVATE_KEY)
The private key to be used by the publisher.
--sequencer.l1PublishRetryIntervalMS <value> (default: 1000) ($SEQ_PUBLISH_RETRY_INTERVAL_MS)
The interval to wait between publish retries.
--sequencer.gasLimitBufferPercentage <value> (default: 20) ($L1_GAS_LIMIT_BUFFER_PERCENTAGE)
How much to increase calculated gas limit by (percentage)
--sequencer.maxGwei <value> (default: 500) ($L1_GAS_PRICE_MAX)
Maximum gas price in gwei
--sequencer.maxBlobGwei <value> (default: 1500) ($L1_BLOB_FEE_PER_GAS_MAX)
Maximum blob fee per gas in gwei
--sequencer.priorityFeeBumpPercentage <value> (default: 20) ($L1_PRIORITY_FEE_BUMP_PERCENTAGE)
How much to increase priority fee by each attempt (percentage)
--sequencer.priorityFeeRetryBumpPercentage <value> (default: 50) ($L1_PRIORITY_FEE_RETRY_BUMP_PERCENTAGE)
How much to increase priority fee by each retry attempt (percentage)
--sequencer.fixedPriorityFeePerGas <value> ($L1_FIXED_PRIORITY_FEE_PER_GAS)
Fixed priority fee per gas in Gwei. Overrides any priority fee bump percentage
--sequencer.maxAttempts <value> (default: 3) ($L1_TX_MONITOR_MAX_ATTEMPTS)
Maximum number of speed-up attempts
--sequencer.checkIntervalMs <value> (default: 1000) ($L1_TX_MONITOR_CHECK_INTERVAL_MS)
How often to check tx status
--sequencer.stallTimeMs <value> (default: 45000) ($L1_TX_MONITOR_STALL_TIME_MS)
How long before considering tx stalled
--sequencer.txTimeoutMs <value> (default: 300000) ($L1_TX_MONITOR_TX_TIMEOUT_MS)
How long to wait for a tx to be mined before giving up. Set to 0 to disable.
--sequencer.txPropagationMaxQueryAttempts <value> (default: 3) ($L1_TX_PROPAGATION_MAX_QUERY_ATTEMPTS)
How many attempts will be done to get a tx after it was sent
--sequencer.blobSinkUrl <value> ($BLOB_SINK_URL)
The URL of the blob sink
--sequencer.archiveApiUrl <value> ($BLOB_SINK_ARCHIVE_API_URL)
The URL of the archive API
--sequencer.rollupVersion <value> ($ROLLUP_VERSION)
The version of the rollup.
--sequencer.ethereumSlotDuration <value> (default: 12) ($ETHEREUM_SLOT_DURATION)
How many seconds an L1 slot lasts.
--sequencer.aztecSlotDuration <value> (default: 24) ($AZTEC_SLOT_DURATION)
How many seconds an L2 slots lasts (must be multiple of ethereum slot duration).
--sequencer.aztecEpochDuration <value> (default: 16) ($AZTEC_EPOCH_DURATION)
How many L2 slots an epoch lasts (maximum AZTEC_MAX_EPOCH_DURATION).
--sequencer.aztecProofSubmissionWindow <value> (default: 31) ($AZTEC_PROOF_SUBMISSION_WINDOW)
The number of L2 slots that a proof for an epoch can be submitted in, starting from the beginning of the epoch.
BLOB SINK
--blob-sink
Starts Aztec Blob Sink with options
--blobSink.port <value> ($BLOB_SINK_PORT)
The port to run the blob sink server on
--blobSink.archiveApiUrl <value> ($BLOB_SINK_ARCHIVE_API_URL)
The URL of the archive API
--blobSink.dataStoreMapSizeKB <value> (default: 134217728) ($DATA_STORE_MAP_SIZE_KB)
DB mapping size to be applied to all key/value stores
--blobSink.rollupVersion <value> ($ROLLUP_VERSION)
The version of the rollup.
--blobSink.viemPollingIntervalMS <value> (default: 1000) ($L1_READER_VIEM_POLLING_INTERVAL_MS)
The polling interval viem uses in ms
PROVER NODE
--prover-node
Starts Aztec Prover Node with options
--proverNode.archiverUrl <value> ($ARCHIVER_URL)
URL for an archiver service
--proverNode.acvmWorkingDirectory <value> ($ACVM_WORKING_DIRECTORY)
The working directory to use for simulation/proving
--proverNode.acvmBinaryPath <value> ($ACVM_BINARY_PATH)
The path to the ACVM binary
--proverNode.bbWorkingDirectory <value> ($BB_WORKING_DIRECTORY)
The working directory to use for proving
--proverNode.bbBinaryPath <value> ($BB_BINARY_PATH)
The path to the bb binary
--proverNode.bbSkipCleanup <value> ($BB_SKIP_CLEANUP)
Whether to skip cleanup of bb temporary files
--proverNode.nodeUrl <value> ($AZTEC_NODE_URL)
The URL to the Aztec node to take proving jobs from
--proverNode.proverId <value> ($PROVER_ID)
Hex value that identifies the prover. Defaults to the address used for submitting proofs if not set.
--proverNode.failedProofStore <value> ($PROVER_FAILED_PROOF_STORE)
Store for failed proof inputs. Google cloud storage is only supported at the moment. Set this value as gs://bucket-name/path/to/store.
--proverNode.worldStateBlockCheckIntervalMS <value> (default: 100) ($WS_BLOCK_CHECK_INTERVAL_MS)
The frequency in which to check.
--proverNode.worldStateProvenBlocksOnly <value> ($WS_PROVEN_BLOCKS_ONLY)
Whether to follow only the proven chain.
--proverNode.worldStateBlockRequestBatchSize <value> ($WS_BLOCK_REQUEST_BATCH_SIZE)
Size of the batch for each get-blocks request from the synchronizer to the archiver.
--proverNode.worldStateDbMapSizeKb <value> ($WS_DB_MAP_SIZE_KB)
The maximum possible size of the world state DB in KB. Overwrites the general dataStoreMapSizeKB.
--proverNode.worldStateDataDirectory <value> ($WS_DATA_DIRECTORY)
Optional directory for the world state database
--proverNode.worldStateBlockHistory <value> (default: 64) ($WS_NUM_HISTORIC_BLOCKS)
The number of historic blocks to maintain. Values less than 1 mean all history is maintained
--proverNode.l1PublishRetryIntervalMS <value> (default: 1000) ($PROVER_PUBLISH_RETRY_INTERVAL_MS)
The interval to wait between publish retries.
--proverNode.customForwarderContractAddress <value> (default: 0x0000000000000000000000000000000000000000) ($CUSTOM_FORWARDER_CONTRACT_ADDRESS)
The address of the custom forwarder contract.
--proverNode.publisherPrivateKey <value> (default: 0x0000000000000000000000000000000000000000000000000000000000000000)($PROVER_PUBLISHER_PRIVATE_KEY)
The private key to be used by the publisher.
--proverNode.proverCoordinationNodeUrl <value> ($PROVER_COORDINATION_NODE_URL)
The URL of the tx provider node
--proverNode.proverNodeMaxPendingJobs <value> (default: 10) ($PROVER_NODE_MAX_PENDING_JOBS)
The maximum number of pending jobs for the prover node
--proverNode.proverNodePollingIntervalMs <value> (default: 1000) ($PROVER_NODE_POLLING_INTERVAL_MS)
The interval in milliseconds to poll for new jobs
--proverNode.proverNodeMaxParallelBlocksPerEpoch <value> (default: 32) ($PROVER_NODE_MAX_PARALLEL_BLOCKS_PER_EPOCH)
The Maximum number of blocks to process in parallel while proving an epoch
--proverNode.txGatheringTimeoutMs <value> (default: 60000) ($PROVER_NODE_TX_GATHERING_TIMEOUT_MS)
The maximum amount of time to wait for tx data to be available
--proverNode.txGatheringIntervalMs <value> (default: 1000) ($PROVER_NODE_TX_GATHERING_INTERVAL_MS)
How often to check that tx data is available
--proverNode.txGatheringMaxParallelRequests <value> (default: 100) ($PROVER_NODE_TX_GATHERING_MAX_PARALLEL_REQUESTS)
How many txs to load up a time
--proverNode.testAccounts <value> ($TEST_ACCOUNTS)
Whether to populate the genesis state with initial fee juice for the test accounts.
--proverNode.sponsoredFPC <value> ($SPONSORED_FPC)
Whether to populate the genesis state with initial fee juice for the sponsored FPC.
--proverNode.syncMode <value> (default: snapshot) ($SYNC_MODE)
Set sync mode to `full` to always sync via L1, `snapshot` to download a snapshot if there is no local data, `force-snapshot` to download even if there is local data.
--proverNode.snapshotsUrl <value> ($SYNC_SNAPSHOTS_URL)
Base URL for snapshots index.
PROVER BROKER
--prover-broker
Starts Aztec proving job broker
--proverBroker.proverBrokerJobTimeoutMs <value> (default: 30000) ($PROVER_BROKER_JOB_TIMEOUT_MS)
Jobs are retried if not kept alive for this long
--proverBroker.proverBrokerPollIntervalMs <value> (default: 1000) ($PROVER_BROKER_POLL_INTERVAL_MS)
The interval to check job health status
--proverBroker.proverBrokerJobMaxRetries <value> (default: 3) ($PROVER_BROKER_JOB_MAX_RETRIES)
If starting a prover broker locally, the max number of retries per proving job
--proverBroker.proverBrokerBatchSize <value> (default: 100) ($PROVER_BROKER_BATCH_SIZE)
The prover broker writes jobs to disk in batches
--proverBroker.proverBrokerBatchIntervalMs <value> (default: 50) ($PROVER_BROKER_BATCH_INTERVAL_MS)
How often to flush batches to disk
--proverBroker.proverBrokerMaxEpochsToKeepResultsFor <value> (default: 1) ($PROVER_BROKER_MAX_EPOCHS_TO_KEEP_RESULTS_FOR)
The maximum number of epochs to keep results for
--proverBroker.proverBrokerStoreMapSizeKB <value> ($PROVER_BROKER_STORE_MAP_SIZE_KB)
The size of the prover broker's database. Will override the dataStoreMapSizeKB if set.
--proverBroker.dataStoreMapSizeKB <value> (default: 134217728) ($DATA_STORE_MAP_SIZE_KB)
DB mapping size to be applied to all key/value stores
--proverBroker.viemPollingIntervalMS <value> (default: 1000) ($L1_READER_VIEM_POLLING_INTERVAL_MS)
The polling interval viem uses in ms
--proverBroker.rollupVersion <value> ($ROLLUP_VERSION)
The version of the rollup.
PROVER AGENT
--prover-agent
Starts Aztec Prover Agent with options
--proverAgent.proverAgentCount <value> (default: 1) ($PROVER_AGENT_COUNT)
Whether this prover has a local prover agent
--proverAgent.proverAgentPollIntervalMs <value> (default: 100) ($PROVER_AGENT_POLL_INTERVAL_MS)
The interval agents poll for jobs at
--proverAgent.proverAgentProofTypes <value> ($PROVER_AGENT_PROOF_TYPES)
The types of proofs the prover agent can generate
--proverAgent.proverBrokerUrl <value> ($PROVER_BROKER_HOST)
The URL where this agent takes jobs from
--proverAgent.realProofs <value> (default: true) ($PROVER_REAL_PROOFS)
Whether to construct real proofs
--proverAgent.proverTestDelayType <value> (default: fixed) ($PROVER_TEST_DELAY_TYPE)
The type of artificial delay to introduce
--proverAgent.proverTestDelayMs <value> ($PROVER_TEST_DELAY_MS)
Artificial delay to introduce to all operations to the test prover.
--proverAgent.proverTestDelayFactor <value> (default: 1) ($PROVER_TEST_DELAY_FACTOR)
If using realistic delays, what percentage of realistic times to apply.
P2P BOOTSTRAP
--p2p-bootstrap
Starts Aztec P2P Bootstrap with options
--p2pBootstrap.dataStoreMapSizeKB <value> (default: 134217728) ($DATA_STORE_MAP_SIZE_KB)
DB mapping size to be applied to all key/value stores